rubber rot in the quarter extensions

tim berry

tim berry

Well-Known Member
Joined
Mar 26, 2012
Messages
300
Reaction score
37
Location
boston area
Thanks for the words of encouragement from all . Just wondering, the cost of the molds is more expensive than I originally thought for shure . The single biggest thing I learned was you have to start this process with an exit strategy or its gonna cost you time or money . I'm hoping that I will be demolding for the last time and moving on to the next step . The drivers side is coming along way faster because of the education and the positive input from the members on this page . Thanks to all !
 
tim berry

tim berry

Well-Known Member
Joined
Mar 26, 2012
Messages
300
Reaction score
37
Location
boston area
jasperjacko said:
what's the word
Click to expand...
The word is slow going I have one side 98% ready the other side is in rough body work and it's too cold in the garage to work on them . When the weather gets warmer into the 40s I can get the garage warm enough to work . Thanks for the continued interest and support.
--- Post updated ---
Dr Lebaron said:
Still say 3D printer.
Click to expand...
I look into 3d printing early on there are some draw backs . The finishes would not be all that good . And the material that's used will not stand up to temp changes . That's why I chose to use casting resin
--- Post updated ---
Dr Lebaron said:
Still say 3D printer.
Click to expand...
I look into 3d printing early on there are some draw backs . The finishes would not be all that good . And the material that's used will not stand up to temp changes . That's why I chose to use casting resin
--- Post updated ---
Im still working on the left side extention the body work is coming along but slow . The dr. Put a damper on my way of life and had to make a few changes losing weight will take care of most of it .here is a photo of where im at

IMG_0784.jpg


IMG_0428.jpg


IMG_0785.jpg


IMG_0788.jpg


IMG_0431.jpg


20160318_134000.jpg
 
tim berry

tim berry

Well-Known Member
Joined
Mar 26, 2012
Messages
300
Reaction score
37
Location
boston area
Thanks guys the reason this is taking so long is you can only work so many 16 hrs. days and wrench when the time permits (none ) it's still happening i promise
 
Oldiron440

Oldiron440

Well-Known Member
Joined
Apr 25, 2017
Messages
3,050
Reaction score
740
Location
Iowa
3M and others have two part flexable part repair products, adhesive and filler etc..These products are epoxy biased.
 
You must log in or register to reply here.
Back
Top