Turn signals and brake lights quit today

Any quick and easy solutions? Both front and rear signals stopped. All running lights are working. Thanks.

Flasher or fuse?

brake light switch, bad ground,

If they both quit at the same time, then probably the Fuse. They are on the same circuit IIRC.But;The rear sockets need to be grounded back to the battery, so it could just as easily be the ground.
But;If the front turn-signals light up but do not flash,then it's probably a faulty Turn-signal switch in the top of the column.
And if all the turn signal bulbs illumine (2+2)but do not flash, then replace the flasher. If that don't do it, then check the grounds;again.
But make sure the brake switch is working before tearing down the column.

All the power for the rear brakelites/signals is routed through the signal switch. I have seen a few melted signal switches, and then nothing connects anymore.....

Luckily, it was the Flasher unit, for the Emergency Flashers.

I don't understand that; That guy should not affect the brake lites.
But I guess I don't need to know everything.
Congrats on the easy fix!

When the flasher is on, the brake lights don't work. So they are connected, somehow.