Christmas Small block set up

[slant6billy]

Mopar ignition orange box,

New dizzy - mopar

New Throttle cable - OEM

Edelbrock Performer series 750 - brand new

The cam is
COMP Cams 20-813-9 - Comp Cams Xtreme Energy Hydraulic Roller Camshaft

So I think 750 is going to workout just fine.

My friend who owns the car is not sure it is going to run by Christmas.

 

[NoCar340]

The 750 and the cam go together, but on what block, heads, intake, etc.? That's a whole bunch of camshaft...

 

[slant6billy]

stroked & bored 318 out of another project . Heads have some work, but I don't have all that info handy. The motor was built a few years back. The original 318 in the car was a low mileage engine, but started to run hot so we pulled it.

 

[NoCar340]

If this is the same engine on which you're attempting to mock up the throttle and choke, I can already tell you this combo is badly over-cammed.

 

[My imp]

Stroked & bored to what? How many cu. in.?

 

[slant6billy]

390 cubes. I really would like to see that cam get a turn in something punched bigger, but it is what it is. I do have a cam of mine that is a hydro- non roller type that was still worth something ( not damaged). just not new. It was in a ramcharger that was pushing 400 plus horses on 44 inch tires. We'll see how the thumper works and if not- there is the used back up.