Plymouth Volare 77` project

Oldiron440

Well-Known Member
Joined
Apr 25, 2017
Messages
3,048
Reaction score
739
Location
Iowa
Two inch square tube, open front of rear frame rail and back of front and slide tube in both ends. You will have to trim rear foot wells for the tubing going forward. Then weld ends and the floor were it buts to the tubing.
 

Aspen500

Well-Known Member
Joined
Feb 14, 2015
Messages
7,030
Reaction score
2,759
Location
Rib Mountain, WI
Here's a pic of my subframe connectors, taken a couple years ago before I changed mufflers. As Oldiron said, slots cut in the rear footwells and the floor welded to the connectors. They don't intrude on the inside of the car far enough to be noticeable. The carpet pretty well hides them.
DSCF0001.JPG
 

Boncky

Active Member
Joined
Sep 17, 2018
Messages
44
Reaction score
42
Location
Poland
Here's a pic of my subframe connectors, taken a couple years ago before I changed mufflers. As Oldiron said, slots cut in the rear footwells and the floor welded to the connectors. They don't intrude on the inside of the car far enough to be noticeable. The carpet pretty well hides them.
View attachment 35760

thank you !
You saved me a trip to the garage. :)

hahah :) it will be great trip...:)
 

Boncky

Active Member
Joined
Sep 17, 2018
Messages
44
Reaction score
42
Location
Poland
few more panels, new frame support, and more... what do You think ?

front:
71648203_901774920215842_4073583236792451072_n.jpg


new frame support
71835771_424085221579407_5284455717216976896_n.jpg

72278203_2571287893101404_5167223622799982592_n.jpg


front right
72124912_2530510113834353_1126060968116224000_n.jpg


72114893_574646866407614_8066294983885324288_n.jpg


now i fight with all quart, i jus start panel, from one metal element
72272422_375779866708645_7379118727834370048_n.jpg
 

Boncky

Active Member
Joined
Sep 17, 2018
Messages
44
Reaction score
42
Location
Poland
Thanks!
I have question i have 1000$ for tune up engine, i want little more power, can i buy somewhere kit for this engine? Or what buy? Maybe we have here someone who sell some parts...
 

BudW

Moderator
Staff member
Joined
Mar 4, 2012
Messages
5,121
Reaction score
1,485
Location
Oklahoma City
I have question i have 1000$ for tune up engine, i want little more power, can i buy somewhere kit for this engine? Or what buy? Maybe we have here someone who sell some parts...
Amazing work so far, Boncky!

I see you have a 318ci (5.2L) 2-bbl. There is a lot of room for improvement.
The question is how much money do you want to spend and how much power are you looking for?
This might be a better topic in a different section (like say in the engine section).
BudW
 
Back
Top