Search results

  1. C

    318 to 360

    I have a new build 360. Presently my Aspen has 318. Looking at Napa parts book the brackets and rubber mounts are the same for the 318 and 360. Is there a difference with the brackets and the rubber isolators? THX
  2. C

    E46 and E47 Options

    In '79 the 360 had the SC(small cam) and BC(big cam). What's up with E46 and E47? THX
  3. C

    DASH COVERS

    Bought a hard plastic dash cover( GLUE OVER EXISTSING DASH VINYL) for my '80 Aspen. Looking for same type for a '79 wagon that I bought. Everything that I found so far is an ugly carpet. Any help? Thanks
  4. C

    2DR and 4DR ARMRESTS THE SAME

    The roll cage of my '80 Aspen won't close w/o crushing the armrests. I have a lead or a 4 DR Aspen in a wrecking yard, about 6 hours away. Trying to find out if the 2DR and 4DR arm rests are the same. I'll need to trim off the foam of the donor parts to get it to fit. The originals are too great...
  5. C

    NEW M PROJECT

    Bought a very clean '81 Diplomat 2dr , /6. Will be replacing the /6 with 318 . I have the 67-69 B body 8 3/4. What's the solution for using a 5 pack leaf spring, ISO delete of course, adding a rear sway bar and what issues will there be with rear shocks(mounting and /or part# needed? THX
  6. C

    WANTED 1980 Aspen Arm Rests

    Just need the upholstered sections, L&R. THX
  7. C

    WANTED 1980 Aspen Door Handles

    Looking for the arm rest portion of the door handles for a 2DR aspen. Message me here.THX
  8. C

    RUBBER TRIM PLASTIC FASTENERS

    Anyone have a lead or source for the plastic trim fasteners for the rubber door trim? How about the TEE shaped fasteners for the seal btwn the hood and rad support? THANKS!
  9. C

    318 to 360

    Same motor mounts when switching from 318 to 360? THX
  10. C

    TUBULAR FRONT SWAAY

    I'll need to increase the front sway bar on my 81 Diplomat. Moving from /6 to SB. Seen comments about FF backorder issues. Any tubular sway bars available? THX
  11. C

    68-70 Bellhousing on M Body

    Pulling /6 and installing a 360 in a '81 Diplomat. My A body 340 bellhousing a direct bolt in?
  12. C

    M TRANSFORMATION

    Planning to redo the motor, trans, rear and suspension of my 2 dr '81 Diplomat. Presently a /6. Moving toward 318 or 360 with about 400 streetable HP(A/C/PS/PB), 2.74 904 and "B" body 8 3/4 with 3.55 gear. For front suspension, other than a Koni gas shock and aluminum K spacers, what else do I...
  13. C

    STEERING REPLACEMENT

    Went out to start the '81 Diplomate in the garage. Battery dead. Factory steering wheel spokes have the horn buttons and they are imbedded in a degraded open cell foam. They hap hazardously turn on and stay on. Looking to replace the factory wheel with a Grant. Nothing listed for my car. Anyone...
  14. C

    WANTED 318 INTAKES

    318 2 bbl intakes 4100331 or 4201120. PM me here. THX
  15. C

    M BODY F BODY SAME HEADERS

    Looking for some quality headers for my '78 Lebaron. There are china ones that never fit right. Found some Hooker for an V8 Aspen. Any fitment issue between these body styles?
  16. C

    PARTS AVAILABLE

    Are all the front suspension parts, including all the bushings, available readily for the F body?
  17. C

    RB HEADERS

    Anyone have a know model of headers that would fit a 440? 1 7/8 is about as small as I could go.
  18. C

    M BODY UPGRADE

    A few weeks ago, I picked up a '81 Diplomat /6 2 door. Topped out at 85 mph and the front end had picked up by the time I hit 65 mph. Definitely driving on a cloud. My other F's are drag car, so I have no idea what it is to drive one of these unless in drag mode They definitely feel better on...
  19. C

    ROAD RACING

    Anyone have a road race set up they'd like to share?
  20. C

    MOTOR MOUNTS

    With some free time, I'm building a 360 for my '80 F body. Presently its a 318. Has the factory motor mounts. The 360 should be making abot 450 HP. Looked at Rock auto for new mounts, not just the insulators. They don't show any difference between a 318 and 360. I thought the drivers side mount...
  21. C

    ISO PUCKS

    I'm looking to replace the front iso rubber pucks. Have a urathane one and an aluminum one. I'll be fabbing a pair for my next race car project. Can I assume that the puck is just a filler? Can I fab a pair fron delrin or aluminum, depending on what is the lightest, and drill some additional...
  22. C

    1980 HOOD DODGE/PLYMOUTH

    Same hood for Dodge and Plymouth? I know the grilles are different.
  23. C

    WANTED 1980 ASPEN HOOD

    Looking for hood in good condition, preferably near PA 19038 due the cost of shipping. PM me here. Thanks
  24. C

    Wheel Size

    Its one of those deals where if you get it right, your good and if not you're trying to sell a brand new set of wheels because they don't fit. I need to put a 9" slick on my Aspen. 8" rim but the backspace that I calculated is off. Measured and thought that a 4 1/2" backspace would be right...
  25. C

    FIRM FEEL

    Anyone use their suspension upgrade 1,2 or 3 on a daily driver?
Back
Top