WANTED torsion bars and / or bar ends.

Status
Not open for further replies.

tubtar

Active Member
Joined
Feb 25, 2020
Messages
28
Reaction score
4
Location
St. Paul , Mn
Contact seller
For an '80 Volare wagon.
I found the V-8 k member and am going through it with new bushings , ball joints etc.
The torsion bars are pretty rusty , and I would like to find some in better shape.
Thanks in advance.
 

XfbodyX

Well-Known Member
Joined
Sep 9, 2015
Messages
1,623
Reaction score
418
Location
Central US
I have one nos T bar assembly left, not sure which side it is if that would do you any good. OR id just sell the bushing off it.
 

tubtar

Active Member
Joined
Feb 25, 2020
Messages
28
Reaction score
4
Location
St. Paul , Mn
I'd be interested in it for sure.
Message me here and we can see if we can make it work.
 

XfbodyX

Well-Known Member
Joined
Sep 9, 2015
Messages
1,623
Reaction score
418
Location
Central US
I cant post pics in a pm...

Pretty simple... whole deal 250 shipped, the bushing end 150 shipped.

May seem high but I sold two nos pairs for 750 a pair shipped on here without issue or complaint.

Two years ago the pairs shipped for 55 each just if anyone wondered, probably $75 today via ups clamped together wrapped properly no box.

DSC01828.JPG


DSC01827.JPG


DSC01826.JPG


DSC01825.JPG
 

tubtar

Active Member
Joined
Feb 25, 2020
Messages
28
Reaction score
4
Location
St. Paul , Mn
I will have to let you know in a couple days.
I have a couple irons in the fire for new ends , which has been a long and strange trip in itself.
But the price is fair enough. I have new poly bushings I plan on using , and haven't pinned down what they will be attached to just yet.
Thanks.
 

XfbodyX

Well-Known Member
Joined
Sep 9, 2015
Messages
1,623
Reaction score
418
Location
Central US
I was sorta looking for a yes or no, one in the hand is better then 200 in the bush. If that place posted had 10 I would of bought 8 and left you 2. Thats how hard they are to come by.

If you still can use this one, check with me come the spring thaw. Reason being im healing up from a couple procedures and its hard for me to plan one day to the next. Today I was good, the weather was good. So back on the shelf. Good luck on your quest.
 

XfbodyX

Well-Known Member
Joined
Sep 9, 2015
Messages
1,623
Reaction score
418
Location
Central US
Why not just go this route?

If by chance youd just want the end let me know, the whole T bar is a bit much for me to commit to currently.

2_d2c52d82d1f1ef4263fc1a0ad61263b9..jpg
 

tubtar

Active Member
Joined
Feb 25, 2020
Messages
28
Reaction score
4
Location
St. Paul , Mn
I'm still bouncing options , and haven't ruled this out.
But the ones I have are too rusty to be saved , so I am exploring plan A , B and C.
I have a set under the car , which is from Indiana and shouldn't be as bad.
But the ones in the V-8 k member I am going through are rough.
The ends are junk for sure , and those bars are probably just as bad under the bushing mount.
 

Camtron

Well-Known Member
Joined
Apr 25, 2019
Messages
1,814
Reaction score
1,376
Location
US
The guys at Firm Feel have two complete sets of NOS torsion bar ends and bushings for our torsion bars...$600 a set for anyone interested.
 

tubtar

Active Member
Joined
Feb 25, 2020
Messages
28
Reaction score
4
Location
St. Paul , Mn
Wow.
I scored a set from Japan and received them last week.
They were 9000 yen , which sounds scary.
But it was about 88.00 U.S. , shipped.
Now , I get to split them and put the urethane bushings in.
But I was damned lucky to find them.
 

76Aspen6pk

Well-Known Member
Joined
Nov 5, 2017
Messages
161
Reaction score
20
Location
Wisconsin
Wow.
I scored a set from Japan and received them last week.
They were 9000 yen , which sounds scary.
But it was about 88.00 U.S. , shipped.
Now , I get to split them and put the urethane bushings in.
But I was damned lucky to find them.
Remember the sight where u found them and part #?
 
Status
Not open for further replies.
Back
Top