8v-of-fury
Well-Known Member
So, this happened about 3 weeks ago where I got to my destination and I go to roll up the window and just hear the motor churning and nothing happening. Then the window would start to make its way up the track. It didnt do it again until today when I rolled it down just fine and then go to my destination and it would not roll up at all.
The motor has power and IS turning, the gear on the arm that actually raises the window looks ok. What the motor gear looks like who knows. IT does appear to be the factory regulator and what not as there is still rivets holding the whole assembly together.
However, it was dark when I pulled the door card off and I didn't have a manual on me to reference how to take the motor/regulator out.. Got any words of wisdom?
If it does turn out I need a motor or whatever, are they still available? thanks guys!
The motor has power and IS turning, the gear on the arm that actually raises the window looks ok. What the motor gear looks like who knows. IT does appear to be the factory regulator and what not as there is still rivets holding the whole assembly together.
However, it was dark when I pulled the door card off and I didn't have a manual on me to reference how to take the motor/regulator out.. Got any words of wisdom?
If it does turn out I need a motor or whatever, are they still available? thanks guys!