Bluejeansthe5th
Active Member
I guess the oil pan is going to have to come back off my 87. The front gasket looks like it is not in place and there is a oil leak there. Hard to see with the cooler lines in place. I read an earlier discussion on oil pan removal. Since the Y-pipe and all was just removed and put back up that should not be too much hassle. I guess the left side engine mount, (on the K-member) just loosen and remove the nut, as the mount is open at the top. Is the right mount the same? It is much harder to see if the mount is open. Waiting for an engine lift/cradle to come in to Harbor Freight, so I can get started. What do folks know about getting the engine up 2 inches.