sooo,
I took some 80grit to my rust spots, applied rust converter and sprayed a little primer over. The good news is, the surface rust didn’t leave severe dimples or holes in the skins. Everything came off and cleaned up well enough.
So my plan (and please correct me where needed)
Mask off car, take panels down to metal with 80grit
Apply ospho
Apply axalta 615s
Apply primer
Sand with 240
Apply enamel satin black
Will this work or do I need to revise my plan?
My hood, roof and trunk are covered in spray paint from a previous owner and the photo attached shows the areas that I removed the rust from this afternoon.
I took some 80grit to my rust spots, applied rust converter and sprayed a little primer over. The good news is, the surface rust didn’t leave severe dimples or holes in the skins. Everything came off and cleaned up well enough.
So my plan (and please correct me where needed)
Mask off car, take panels down to metal with 80grit
Apply ospho
Apply axalta 615s
Apply primer
Sand with 240
Apply enamel satin black
Will this work or do I need to revise my plan?
My hood, roof and trunk are covered in spray paint from a previous owner and the photo attached shows the areas that I removed the rust from this afternoon.
Last edited: