JSALeBaron
Active Member
- Joined
- May 14, 2011
- Messages
- 27
- Reaction score
- 4
Contact seller
Up for sale are 2 sets of small block Mopar heads. The first set is off my NHRA Stock drag car. They are a set of 596 castings with Comp valve springs and aftermarket steel valves. They make great power for stock style lifts. Over .460 they start to die off a little. They have run a 3700 lb. car to 11.90's at 108 mph. They have been checked out by Zimmerman Heads of Indiana and were going on my race again this year but I found 2 sets of 308 heads so one of them got the nod. I would like $300 for these heads. The second set is a set of 308 heads off a running 3/4 ton pick up truck. They are stock. I intended to use them in my race car as I bought 2 sets (knowing the seats crack), but both sets were great and my head guy found no problems. I would like $250 for these. Shipping will be paid by the buyer. I live in Omaha, NE, but will be traveling to Topeka KS, Earlville IA, and Dallas TX this year. Also, if someone wants to move fast on them, my parents still live south of Indianapolis and they are coming out this weekend and could drive them that far. The pistons/rods are used, and Venolia finished with a JE plug. They are for a .030 over 360. They ran great, but I decided to go to .060 over this year. I would like $150 for these. They weight stock minimum. If you have any questions, please PM me or call me at 317-430-three0nine5. Thank you very much for looking, Wayne.