What's it worth - Diplomat dash pad and head light / grill panel and some smalls

[tallhair]

I have some poor pics of a Diplomat Dash pad and two front headlight grill panels (is that what they are called?). If the pad has no rips (I'm pretty sure it's usable) and the 2 caps are worth using what would each be worth high / low / on average etc? I plan to place an ad and am looking for help as I have no idea on prices for these things.

Here are some pics .. I am trying to clear out the garage they are in so am running like a chicken with my head cut off so I apologize for bad pics. Base prices on good usable condition please.

I've mentioned before the parts are a good haul from me so sorry again for bad pics I'm always busy when there .. but will bring them to my house for better pics when / if anyone is interested

The metal part of the dash is rusty as shown

PICS of front caps will come next

 

[tallhair]

Here are the pics I have of the grill / headlight assys

 

[tallhair]

I also have some smalls for Dippy Cop Cars

I assume it's not worth much so please just be honest and fire away. The basket is here at the house but the heater ctrl isn't .. I don't think.

The light assembly's are good but the square one may not be a Diplomat item ??

The aluminum carpet finish panel may be ??

 

[brotherGood]

The header panels look to be in better shape than the one on my car. If you can find local people who need em, there's your best bet. Otherwise, it'd be a bear to ship.

If I still lived in Illinois, I'd offer to help you go through it..

 

[tallhair]

Thanks brothergood. What should I be asking for them?

I'm sure i can ship through fastenal if the buyer has a fastenal store near them, for somewhere in the neighborhood of $100-150 for both of them together.

Appox how much would one weigh?

 

[ramenth]

Thanks brothergood. What should I be asking for them?

I'm sure i can ship through fastenal if the buyer has a fastenal store near them, for somewhere in the neighborhood of $100-150 for both of them together.

Appox how much would one weigh?

Weight on each... probably fifteen to twenty pounds.

As far as asking price if the fiberglass is in good shape and all the trim work is nice (no breaks, no cracks) $200-$250 is a fair price.

 

[tallhair]

Thanks Ramenth! For one or both?

Anyone have any ideas on the dash pad and dome light?

Maybe $125 on dash pad and metal and $20-25 on the dome light?

Maybe $30 on the HVAC controls and $5-10 on the aluminum carpet trim piece (I assume that's what it's for ??) ?

Or is that too much?

I'd just be happy to move for going prices and be fair to both parties. I appreciate any and all help as I really don't have any idea unfortunately

 

[tallhair]

I'll get some more pics of the dome light tomorrow .. it's pretty nice.

The basket is here at the house

 

[ramenth]

That's each.

The rest of your prices seem reasonable.

Be prepared to move on prices if you have too, though. Us F/M&J guys are even more notorious cheapskates than the A-body guys.

Nah, I take that back. If an F-body guy finds a perfect grille for a the right price he'll buy it. The A-body guys will still whine about it. lol

 

[tallhair]

That's each.

The rest of your prices seem reasonable.

Be prepared to move on prices if you have too, though. Us F/M&J guys are even more notorious cheapskates than the A-body guys.

Nah, I take that back. If an F-body guy finds a perfect grille for a the right price he'll buy it. The A-body guys will still whine about it. lol

Thanks and that's pretty funny Ramenth. I actually have several parts for a 69 Dart parts and have only heard crickets when I've put up ads for what I thought were very reasonable prices. Grill and bezels, doors, hood, decklid, bumpers, tail light . not much interest. You'd think these parts where just were laying around in ditches everywhere

 

[tallhair]

I'll get an add up tonight guys

Thanks for everyone's help .. prices will be inline with suggestions above

 

[tallhair]

I found a few more parts and remembered some others.

There is a set or two of wire wheel hubcaps .. still there

A head light switch.. brought it home

I believe a pair of dippy door handles .. brought them home

Possibly 1 or 2 bucket seats in the rafters .. still there

I have several fan shrouds and radiators and a one or two with trans coolers .. maybe one from an early 80's dippy. Have pics of most w/ part numbers still in storage

rear view mirror .. brought it home

I also brought home the AHB dash bezel with add on oil guage

4 BBL quadrajet .. that's what was on cop cars right? .. brought home

4 BBL Air cleaner .. have pics but still there

SB OEM electronic distributor .. here at the house

PM Please if interested.

 

[Jack Meoff]

Any of the midget slant six shrouds??

 

[tallhair]

Maybe. Got a part number?

Here's the ones I have posted over on FCBO .. they are not all C body shrouds just where I have them posted

WARNING !!!

Open this link with extreme caution there are a lot of dirty parts in here LOL

http://www.forcbodiesonly.com/mopar-forum/showthread.php?12560-Various-Fan-Shrouds

 

[tallhair]

BTW I have some leaning tower of power parts too if you guys are interested

manifolds, valve covers, oil pans, couple of aluminum OD manual transmissions, bellhousing etc etc etc

I think I have a /6 head or two and maybe an slanty engine there are at least 10 engines ... SB, LB, RB and a bunch of automatic trans .. mostly B/C/E body BB 727's.

I may have a SB 727 and some 904 or 2 also

 

[Jack Meoff]

No part number but I think the midget rads are 19 inchers.

 

[tallhair]

No part number but I think the midget rads are 19 inchers.

There is one really small one over there and pics and part numbers are posted in that link .. did you look at it?

 

[Jack Meoff]

There is one really small one over there and pics and part numbers are posted in that link .. did you look at it?

I'll have to look again....
There were a bunch and it's hard to tell them apart with their uniform on....

 

[tallhair]

There's a link to Rad part numbers in the thread. Maybe you could tell me the one you are looking for, for your application and I could help.

Near the end of the thread I posted individual pics and part numbers of each.

the really small one is in that lot.

 

[tallhair]

I also have the wire wheel hubcaps .. still in storage .. PM me

There's also an aluminum looking curved shield (starter shield?) or maybe access cover for front suspension .. not sure what it is .. in storage but I have pics

and some windshield washer reservoirs and rad overflow tanks .. plastic ... here at the house

I have a lot of carbs - OEM Holly and Thermoquads and some 1 and 2 BBLs some here some in storage

and a steering wheel .. here at the house

and wheels too .. lots of ads posted at FCBO