Duke5A's latest activity
-
now I can’t help but wonder where the molds are to make our clips, lol covered in dust sitting in storage in a factory long forgotten... -
Ready for the Drag Strip memories this next weekend and the car has fresh paint (Russet Sunfire) and it's correct stripes. I really like...
-
Duke5A replied to the thread New kick down bands.Do the 904 cast drums go kaboom like the 727 drums do? When the 518 comes out it's getting a steel drum.
-
Duke5A replied to the thread Random Pics.Used to be one of my favorite things to do: just get the 5A and drive. Usually in the dead of night around 2am in the middle of the...
-
went down a country road i never been down
-
Bluebirds (and a panther) are out, spring time in Chicago.
-
Duke5A replied to the thread New kick down bands.I really do commend you Camtron. For all the work I've done to my car I've never opened a transmission further than the valve body...
-
Duke5A replied to the thread Front end squeak: Ball Joint or Torsion Bar Bushing?.At 128k I'd be rebuilding the front end regardless of squeaks. If you want to do most of it yourself, but don't want to monkey with the...
-
Duke5A replied to the thread M body driver side front seatbelt, NOS, red, ebay, $50 obo.GIMME! MINE! Dude, thank you so much for posting this. I didn't even haggle for it.
-
Duke5A reacted to AMC Diplomat's post in the thread M body driver side front seatbelt, NOS, red, ebay, $50 obo with.Guys, it's a complete pain in the ass finding seatbelts for these cars. Most of the ones I find are blue. Here's a red one...
-
A couple better random pics. What I can't wait to get out for the season, if it ever gets here. Neither have been out since late...
-
Duke5A replied to the thread Propeller shaft and rear axel.You probably already know this, but you'll need to swap slip yokes between the driveshafts you have. 904 and 727 use different yokes.
-
What I ended up doing is I installed a relocated oil filter to the rad support and the cooler runs off those lines. I used a good...
-
Regarding the sawzall - I used a 6" carbide grit blade (an old one at that) and it cut through the bolt like butter.
-
Duke5A replied to the thread Over sized Tire 1980 Mirada.If you don't plan on a host of other upgrades I would run 235-60-15 on all four corners. Now you can rotate the tires. You'll need a...
