Ele115's latest activity
-
Ele115 replied to the thread V10 Magnum swap?.The doors would never close again but you would get a lot of "views" -
Ele115 replied to the thread V10 Magnum swap?.Put a 16 cylinder Detroit in it with an air starter, don't half ass this
-
Ele115 replied to the thread Lean-Burn Conversion.My main issue with the 80 Aspen FHP car was it would run too lean. There is a TINY bit of adjustment on the TQ, but not enough. The...
-
Ele115 replied to the thread this is what i'm busy with.Like the 25 different ways they have now for putting rear main seals in now so they "won't leak" The web made the abundance of theories...
-
yes top and 2nd ring gaps the same. i follow the instructions from Total Seal. bore x .0045'' for both top and 2nd. in my case that's...
-
Ele115 replied to the thread Ford guys got us.New Yaawk and California. They have six laws for everything you want to do
-
Ele115 reacted to PursuitSpecial's post in the thread Misfire when light throttle and sparks fouling - Help needed with.I've seen this problem before. Some of the Edelbrock performer dual plane intakes have an inner bolt hole drilled all the way through...
-
Ele115 replied to the thread Misfire when light throttle and sparks fouling - Help needed.Thanks for pointing that out. This is definitely a common thing. If you have a vac leak you can't seem to find (anyone with these...
-
Ele115 replied to the thread what the hell is that noise?.Some lad seemed to luck out. Good on you
-
Ele115 replied to the thread Well This Sucks!!.I would have two options if I had this right now. My die grinder and a 5 inch tapered (flame shaped tip) burr or the plasma cutter. I...
-
Ele115 replied to the thread Well This Sucks!!.A grinder and burr like you would use for porting cylinder heads. The pointy tip should get in there. But that's only if you have the tools.
-
Ele115 replied to the thread what the hell is that noise?.I have seen some wheel vintiques that wont balance unless you put weights 2/3 of the way around the rim. Summit will allow returns, but...
-
Ele115 replied to the thread what the hell is that noise?.Tony would have the real (used) ones and not kill you for them. They would obviously fit. If you cant find them locally go to him. I get...
-
Ele115 replied to the thread what the hell is that noise?.Yes, that was an alley repair. It would have been pretty standard to hog the cat out with a long chisel and put standard exhaust pipe in...
-
Ele115 replied to the thread what the hell is that noise?.Have some decals made "Tragate Mi Polvo" in old english font on the rear window in Old Engrish font. You wont regret it.
