Devon Arden
New Member
Hey there guys ..new to the site and looking forward to learning what i dont know and sharing what I do !
My name is Devon..im 37 years old,with a fiance and a daughter and I am a red sealed automotive collision repair technician-began as a lil guy with my father who was a restoration show car body and paint tech
Been in love with mopar since I was a child, my father owned a 73 dart sport with a 383 with lots of goodies and a 1970 coronet R/T 440 built very mean with the hemi 4 gear
Ive recently acquired my first mopar ..it is no coronet R/T but a guy has to stsrt somewhere,no?
I got a late 1979 Aspen R/T
LA360 bored 30 over
Holley 3310-6 750 vac sec
Weiand action + intake
Keith black kb107 pistons
Hasting moly rings
Comp cams xe268 cam
Long tube headers
Iron heads with 1.88 elgin valve,howard springs and a clean up
This boxing day sale however I am buying a set of the performance world 63171A-2 aluminum heads with 179 cc runners 2.02 valves with a 63 cc combustion chamber
Just got a transmission built for it
A518(46rh) with some billet parts such as clutch drum and a handful of other parts im spacing out on ..some extra clutches and overdrive improvements a pimped out shift kit and a lock up converter
Rear end is a posi ford 8.8 held in by a couple of the mopar performance super stock springs that I fabbed new hanger brackets and mounts for ....
My name is Devon..im 37 years old,with a fiance and a daughter and I am a red sealed automotive collision repair technician-began as a lil guy with my father who was a restoration show car body and paint tech
Been in love with mopar since I was a child, my father owned a 73 dart sport with a 383 with lots of goodies and a 1970 coronet R/T 440 built very mean with the hemi 4 gear
Ive recently acquired my first mopar ..it is no coronet R/T but a guy has to stsrt somewhere,no?
I got a late 1979 Aspen R/T
LA360 bored 30 over
Holley 3310-6 750 vac sec
Weiand action + intake
Keith black kb107 pistons
Hasting moly rings
Comp cams xe268 cam
Long tube headers
Iron heads with 1.88 elgin valve,howard springs and a clean up
This boxing day sale however I am buying a set of the performance world 63171A-2 aluminum heads with 179 cc runners 2.02 valves with a 63 cc combustion chamber
Just got a transmission built for it
A518(46rh) with some billet parts such as clutch drum and a handful of other parts im spacing out on ..some extra clutches and overdrive improvements a pimped out shift kit and a lock up converter
Rear end is a posi ford 8.8 held in by a couple of the mopar performance super stock springs that I fabbed new hanger brackets and mounts for ....
