Search results for query: *

This is a Set Of Four Appliance Industries 14"x7" 6 Hole Spoke Wheels. The hole spacing is 5 1/2", so they fit a number of different makes and models of vehicles.. They are in good condition, just could use a cleanup, and maybe a repaint if you want. $120.00. Local pickup preferred, or will...

This is a OEM Small Block Mopar Ignition Coil Bracket. It is original, not a china knockoff, and is in good condition, Just could use a cleanup. $15.00. Local pickup, or buyer pays shipping.

These are OEM Single And Four Nipple Vacuum Ports. They Came off of big block Mopars, but may work on small blocks too. $20.00 for both. Local pickup, or buyer pays shipping.

This is a OEM 1960's, 70's Throttle Stud. It is original, not a china knockoff. It is for an auto trans, but can also be used with a stick. It is in good condition. $20.00. Local pickup, or buyer pays shipping.

Any Nam Vets out there carry a 12 gage shotgun in the bush? If so this will look familiar to ya. This is a U.S. Military 12 Gage Buckshot Ammo Can. It is in good condition. $20.00. Local pickup, or buyer pays shipping.

This is a set of OEM Mopar Small Block Cylinder Head Bolts. They are original, not china knockoffs. They came off of a 71 340, and are in good condition, just could use a cleanup. $50.00. Local pickup, or buyer pays shipping.

These are a Pair Of OEM Mopar Police Car Wheels. They are 15" by 7" with a 4 1/2" lug pattern. They have the Chrysler Pentastar and what looks like L9 stamped by the valve stem. They are not new, but are in good used condition. $50.00. Local pickup, or buyer pays shipping.

This is a Set Of OEM Small Block Mopar Intake Manifold Bolts. They are original. not china knockoffs. They are in good condition, just could use a cleanup. $20.00. Local pickup, or buyer pays shipping.

Event Info: Mopar Showdown | Rock Falls Raceway

This is a Hygrade Holley 4160 Model 4 bbl Carb Rebuild Kit #462B. It was opened years ago to replace a carb to manifold gasket, but is otherwise complete. $35.00. Local pickup, or buyer pays shipping.

This is a C. A. Norgren Pressure Regulator Model 11-002-067. It is used, but works fine. Includes pressure dial and output coupler. $25.00. Local pickup, or buyer pays shipping.

This is a OEM Set Of Small Block Mopar Intake Manifold Bolts. They are original out of a 1969 340, not china knockoffs. They are in good condition, just could use a cleanup. $20.00. Local pickup, or buyer pays shipping.

This is a Bumper Jack with Tire Iron. I can no longer remember for sure which one of my Mopars it came out of many years ago. It is in good working condition, but could use a cleanup and repaint. The jack, base, and tire iron are blue. I don't have the hook for it. $60.00. Local pickup, or...

This is a Norgren Water Trap & Air Pressure Regulator. I used it for many years until I closed my shop. It always worked fine. It does need the glass replaced on the pressure dial. $30.00. Local pickup, or buyer pays shipping.

This is a Dual Feed Chrome Fuel Line. I used it on one of my Offenhauser, AFB dual quad setups back in the day. It is in good condition. $20.00. Local pickup, or buyer pays shipping.

This is a Old School Center Cap for A Keystone Mag Wheel. It includes the inner retainer and screw. It measures 3" diameter at the base and 2 1/2" in depth. It has some pitting so it is not show quality, but maybe someone can use it. $15.00. Local pickup, or buyer pays shipping. (I only have one)

This is a Vintage Parker Cutlery Boot Knife. It is surgical steel Japan. I've owned it for over 40 years. It is in good condition. $50.00. Local pickup, or buyer pays shipping.

These are Two Aftermarket Gauge Brackets. The single one is new, and the triple one is used. The holes are about 2 inches. $10.00 for both. Local pickup, or buyer pays shipping.

This is a pair of 1980's Exhaust Manifolds #4173166 & #4173156. They come off of a 1988 Plymouth Gran Fury Highway Patrol car that we stripped and turned into a stock car. It had the HP 318ci 4bbl engine. They are in good condition and have the AIR pipe caps on the end of the manifolds, which...

This is a OEM Mopar 1970's Ignition Lock Cylinder w/key. This came out of a 1973 Charger SE with a tilt column. It may also be correct for other years and models. $15.00. Local pickup, or buyer pays shipping.

This is a OEM Four Nipple Vacuum Port. It Came off of a big block Mopar, but should work on small blocks too. $15.00. Local pickup, or buyer pays shipping.

All Leather Carpenter's Tool Belt/Pouch. Any carpenters out there that can use this tool belt/apron. It is all leather, including the belt. Not cheap nylon. I bought it new over 30 years ago, and barely used it. It is in very good condition. $20.00. Local pickup, or buyer pays shipping.

This is a Pair Of OEM 1964 to 74 Chrome Door Lock Knobs for A-B-C bodies. They are original, not china knockoffs, and are in good used condition. $10.00 Local pickup, or buyer pays shipping.

This is a pair of OEM 1970's Outside Door Handles #3882626. They are original, not china knockoffs. They came off of a 1973 Charger SE. I'm not sure what all years and models these work on. They are not mint, but are in decent driver condition. $30.00. Local pickup, or buyer pays shipping.

This is a pair of OEM Big Block Mopar Rocker Arm Shafts. They are original Mopar, not cheap china knockoffs. They are in good condition, just could use a cleanup. $35.00. Local pickup, or buyer pays shipping.