Search results

  1. picklesgarage

    gas tank fill gromett

    if its the same as L bodies and others its available from the dealer
  2. picklesgarage

    Radiator

    BudW: I'm sure it will probably need the uppers redrilled. the "bolt in" on i had bought as a replacement wasnt right. had to drill the drivers side to fit and expand the holes on the shroud to fit. oddly enough i had to make a bracket to more the passenger side of the condenser forward since it...
  3. picklesgarage

    Radiator

    seems like the big the to watch out for is going to be placement and maybe size of the inlet and outlets. glad that the 26 will fit from most anything that had a 26. i was told else where that a 73 b body fit from champion. might go that route. need to hurry up and pass papers on the new house...
  4. picklesgarage

    Radiator

    so Napa, Autozone and Rock no longer have the radiator in stock. looks like they all used the same supplier. no luck on finding my original radiator so far. thought i saw someone mention one of the truck ones fit? im guessing maybe a b or c body one might depending on in/out let placements and...
  5. picklesgarage

    Radiator

    ya i wish i had paid that now.
  6. picklesgarage

    Radiator

    so didnt even get a year out of the radiator before it started leaking. its not hitting the ground yet but making a bit of mess and can smell it burning. im pretty sure i got rid of the original but will have to wait for the snow to melt to double check. luckily it still doesnt over heat and i...
  7. picklesgarage

    WANTED torsion bar bushing kit.

    here they are in polly if that helps Torsion Bar Center Bushings 76-89 Dodge/Chry/Plmth (turbosunleashed.com) Torsion Bar End Bushings '76-'89 (turbosunleashed.com)
  8. picklesgarage

    latch/ car seat tethering system

    i had come across some heavy duty looking tie downs and was thinking maybe those would work attached at the seat belt buckles for the bottom end. not sure about the top. havent had the chance to really look at the problem
  9. picklesgarage

    latch/ car seat tethering system

    chrysler started adding them in the early 2000s, pretty much standard on todays cars. wasnt sure about this kit, or where its made. there are a couple listed as universal kits when googled. was thinking maybe there was a factory setup that could be modified to fit as well. was hoping someone has...
  10. picklesgarage

    latch/ car seat tethering system

    hoping this is the right area for this. to start its an 86 5th Ave. has anyone here added any of the "universal" tethering systems to their M body? my toddlers seat doesn't allow the center buckle to be in a place that isn't sticking into his back. he has out grown his rear facing bucket that...
  11. picklesgarage

    to iso clamp or not to iso clmp?

    did the shocks a couple days after and that made a huge difference in ride and noise. used KYB GR-2/ Excel-Gs on all four corners. bonus there was a $25 rebate.
  12. picklesgarage

    Gas Mileage on a Run

    MoparDan, I'm sure i could do better if i make a few adjustments. i'd like to say that its just cause of all the hills and elevation but i get in the 20s with my 93 3.3 grand voyager consistently. might help if i say out of the throttle a bit more is probably the truth of it
  13. picklesgarage

    Gas Mileage on a Run

    i got 13.7 mpg on my last fill up. there was probably a week or two where it was just moving it in and out of work so hoping with this tank being real driving i will see at least that good if not better. car is currently set up with the factory carb and the lean burn deleted, still has the...
  14. picklesgarage

    to iso clamp or not to iso clmp?

    Need to replace the shocks but in and secure. A big thanks to Jim for the "new" clamps and for all the input here.
  15. picklesgarage

    to iso clamp or not to iso clmp?

    A little thin coming out
  16. picklesgarage

    to iso clamp or not to iso clmp?

    good to know. hadn't gotten to worrying about that yet. pads and u bolts came in yesterday and should have the clamps tomorrow if the tracking is correct. it will be nice to get back to driving it.
  17. picklesgarage

    to iso clamp or not to iso clmp?

    M_Body_Coupe ya i was looking for them with no luck. hopefully the ones for springnthings are good.
  18. picklesgarage

    to iso clamp or not to iso clmp?

    so just ordered the u bolts from https://www.springsnthings.com/. said they should ship in 1 or 2 days.
  19. picklesgarage

    to iso clamp or not to iso clmp?

    i'll have to double check but I think the last "local" spring shop closed.
  20. picklesgarage

    to iso clamp or not to iso clmp?

    anyone with recommendations on where to get u bolts? the closest I can find are 7/16x6 3/4x3 1/16. my understanding is the axle is a 3 inch diameter.
  21. picklesgarage

    to iso clamp or not to iso clmp?

    so ordered a set of clamps from Jim and a set of 5.6106R off ebay. not that i want red but being almost $20 cheaper then the black and the i should have them by 8/24 instead of next month sometime i can live with it if they work. now i just need to find u bolts and shocks
  22. picklesgarage

    to iso clamp or not to iso clmp?

    is this the right set or part number? energy suspension 5.6106. are there others available?
  23. picklesgarage

    to iso clamp or not to iso clmp?

    Aspen500 would that be F body Deconstructor Jim? i just saw his add up and sent him a message. thank you.
  24. picklesgarage

    to iso clamp or not to iso clmp?

    for some reason i thought it was that it lowers it. glad thats not the case. thank you
Top