Search results

  1. 88_AHB

    FOR SALE Parting out 1984 Plymouth Grand Fury

    Whats the status/situation with the car being parted out?
  2. 88_AHB

    Headliner Color Selection

    Anyone have pictures of their taupe color interior similar to my 88? Wanted to get a idea on how the headliner is compared to the rest of the interior.
  3. 88_AHB

    FOR SALE M - body dash pad

    Sounds good just let me know, I can send you a email as well.
  4. 88_AHB

    FOR SALE Parting out 1984 Plymouth Grand Fury

    Oh lol I just assumed like so much for these cars it's either almost impossible to find or obsolete. Thanks
  5. 88_AHB

    FOR SALE Parting out 1984 Plymouth Grand Fury

    Could you please share the link or source where these would be? thanks
  6. 88_AHB

    Headliner Color Selection

    Hey everyone, Was looking to see if anyone else here had the same color interior as my car does? I was mainly curious to see if the headliner's fabric is the same color, as the rest of the interior pieces or lighter/darker. I didn't want to go with something that would look off or incorrect...
  7. 88_AHB

    FOR SALE Parting out 1984 Plymouth Grand Fury

    The actual switch itself, I wasn’t aware they sell them new?
  8. 88_AHB

    FOR SALE Parting out 1984 Plymouth Grand Fury

    I can't unfortunately, im on the west coast in CA. Maybe the smaller parts be easier or possible to ship?
  9. 88_AHB

    FOR SALE Parting out 1984 Plymouth Grand Fury

    Tailights, Window trim, Front turn signals/side marker, Driver side mirror, Hood ornament, Interior Salon badge, turn signal switch. Possibly more items depending on whats left.
  10. 88_AHB

    FOR SALE Parting out 1984 Plymouth Grand Fury

    Tried to send you a private message but your inbox is full. Interested in getting some parts off the Gran Fury.
  11. 88_AHB

    FOR SALE M - body dash pad

    $80 Bump
  12. 88_AHB

    8-1/4" Limited Slip

    Might be a little off topic but, I know a 29 spline would be considered a stronger axle than a 27 spline. Would you guys think this difference is worthwhile in durability and holding up to more HP? I know of course there's various factors that come into play with axle longevity such as driving...
  13. 88_AHB

    Ticket light

    Hey this picture looks familiar? lol Good to see you're starting to put the light in that I found for you seemed like it took forever to get to you. You might want to try and post this question in the vintage police car group on Facebook as well. I'm sure a few guys on there have this light in...
  14. 88_AHB

    A904 vs A999 vs A500

    What steps is there to take to beef up a A500? I'm sure there's a bunch of ways and money that can be sank into upgrading one.The obvious one I can think of is a shift kit and possibly Kevlar clutches etc. I've also heard some people using the drum from a A999 because it has 5 disc in it rather...
  15. 88_AHB

    FOR SALE M - body dash pad

    That's a great point and still could go this route. I did find a exact match a few months ago out of a 5th avenue. Just thought someone might have a need for it more than I do currently before it gets boxed up and put into storage again.
  16. 88_AHB

    FOR SALE M - body dash pad

    It is in really good shape,unfortunate that its a bit off in color for my interior.
  17. 88_AHB

    FOR SALE M - body dash pad

    Have a M body dash pad in good shape. Bought it a few years ago, doesn't quite match my the interior on my 88. Willing to ship at buyers expense. Message for any questions etc. $100
  18. 88_AHB

    A904 vs A999 vs A500

    Hey guys, Have been tossing around the idea of switching things up with rear end gearing and possibly a trans swap. I've done some research on these three transmissions. Right now in my 88 have either a 2.73 or 2.90 gear with a mild 318/904 2500 stall with a 225.70.15 tire. I've read some posts...
  19. 88_AHB

    Wiper Linkage Rehab

    I was forced to re-do my wiper linkage bushings last winter when the rains started when the bushing on the motor arm failed. I was initially going to go with the dorman bushings.I read some not so good reviews here on them and opted to go with the OE Mopar bushings $4-$5 a pop on ebay. I took my...
  20. 88_AHB

    Ring and pinion 8.25

    I've found conflicting results for both the suregrip (spring type ) and trac lok ( cone style ) carriers on which could or able to be rebuilt.
  21. 88_AHB

    Ring and pinion 8.25

    Is the trac lok cone style normally found in a dakota are they serviceable? any advantages over one another other than serviceability? One perform or last longer than the other etc.?
  22. 88_AHB

    Ring and pinion 8.25

    So over the weekend I decided to look at a few 8.25's in some early-mid 90's dakota's at the junkyard. All the limited slips looked the same except for one. Now I realize they could of been rebuilt etc. over the years. My main question is, this particular carrier still a sure grip and would it...
  23. 88_AHB

    Ring and pinion 8.25

    Thanks! All great info guys, fairly sure I'll stick with a sure grip for a LSD. Still little undecided on brand of gears, I'll have to do some more researching.Deciding between either Yukon,Motive or USA standard. Also has anyone had experience with Sierra ring and pinions? Sierra Gear & Axle...
  24. 88_AHB

    Ring and pinion 8.25

    I wasn't sure on yukon's origin as well, have had heard good things about them anyhow. I was debating between a sure grip or yukon LSD or the auburn LSD.
  25. 88_AHB

    Ring and pinion 8.25

    Hey everyone, I’ve been looking around for a good quality ring and pinion set for my 8.25. I’ve found that just about all the companies out there are made overseas. Also that some companies are owned by another. Anyone here had good luck with a certain company? Prefer a U.S. made product and...
Top