Search results for query: *

For sale: One Pair of Front and One pair of Rear Bumper to body spacers for the F body. These came off of a '79 So they will fit a '78 and '79 Unlikely to fit an '80 or a '76-'77 model. Parts are presentable, but not perfect, so if yours are rotted, cracked missing etc. these would be an...

Stamped Steel Slant 6 Alt Bracket - From a '79 Volare'. Degreased and ready for your project needs. $10 Plus Shipping from 15642, PA

All Driver Quality, Not for your 100 Point restoration. All hubcaps have small scratches especially near the fratzogs, dings, slight removal marks, or touch up with black magic marker. Prices Listed as Below, Plus Shipping from 15642, PA to you. - Buy 1, Buy 2, 3, or 4, mix and match to suit...

Stock Tin Shroud for the Slant 6 on emissions era Engines to help direct preheated air to the air cleaner housing during warm up. Surface rust but no rot. Asking $10 Plus Shipping from 15642, PA to you https://flic.kr/p/2rSqyQb]20260118_101236[/url] by...

$10 Each Plus Shipping from 15642, PA to you Driver's Side Kick Panel And under dash / steering column cover with matching fuse panel cover.

I have some parts left from a '79 Volare' Coupe that I have mostly Parted. If anyone is interested in these parts please respond, otherwise They will go to the scrap pile, and get cut with no regard for saving the parts. I can remove parts properly with a minimal amount of damage using a spot...

Set of 4 Fratzog Spinner wheel covers: - 14" wheel size - Factory correct item for 1962 Dodge Polara 500. Nice parts but not perfect. Some wear, chrome on spinners not perfect and some small wrinkles as shown in pictures. Asking $80 OBO Plus Shipping from 15642, PA to you.

Here is an Edelbrock Torker II Intake. I cleaned it up a bit, I put in in the bead blaster and gave it a nice shine. It is ready for paint or you could leave it with the satin finish from the bead blasting cabinet. Asking $225 OBO Plus Shipping from 15642, PA to you. It arrived to me with a...

New in package Hurst 5 Speed Shifter Handle Ball P/N 1630014 For M12X1.75 Threads - May fit T5, and other 5 Speeds. Asking $60 Plus $10 Shipping from 15642, PA to you.

Pool Ball Shifter Handle - Custom Made. 1/2"-20 Threads on the inside. Asking $20 OBO Plus $6 For Shipping From 15642, PA

.

For sale - '79-'80Aspen Tail light lens, Just the Lens, No Housing. It is not perfect, but very presentable. $40 OBO plus Shipping from 15642, PA Some marks, a small chip shown in picture, and a crack in the clear reverse lens section.

For sale is a very nice 7260 Series 904/ 3 speed transmission slip yoke. It's all cleaned up, ready for your project Asking $40 plus shipping from 15642, PA to you.

Hello Sages, I have access to a 1980 Volare Cop Car. I am interested in the difference in sway bar and Torsion bar Diameter between the 1980 Cop car (not sure if they were AHB's yet in 1980) as compared to the same parts - (front sway bar and front torsion bars) on a stock 1979 Volare Slant 6...

Good Cores for a re-chrome. Front Bumper Guards / Bumperettes from a '78/'79 Volare' / Aspen Asking $40 OBO Plus Shipping from 15642, PA

Here is a Set of '78-'79 F Body Bumper Supports / inside bracing for models with nerf/ rub strips and bumperettes/ bumper guards. Good Solid pieces with no major rust or rot. Asking $40 OBO plus Shipping from 15642, PA (I can bead blast them if you like for an Extra $40) Pictures below:

Here is a '78-'79 F Body Front Bumper Shell. I Think It will fit a '76-'77 But it is not correct. Also the aspens had the parking / turn signals in the bumper which this unit does not have. It is usable for a core, It is not rotted through anywhere that I can tell. Has plenty of rust on the...

Asking $75 - F Body Coupe Trunk lid. Nice and Straignt, no Damage or repairs. Seam Saler from factory underneath will need attention and redone for a nice project car. If installing on a driver it can be used as is. No Major rust. Located in Irwin, PA, 15642, Near I70 and I76 Interchange /...

For sale is a rear Body harness From a '79 Volare' Not equipped with many options. No heated Rear Window, no Power Windows or seats. Wiring from the Green Kick Panel Connector To the Tail Lights All looks good, no cuts, Removed with Care, removing Wire Loom Clips and Grommets, all Grounds...

For Sale is an early 8.25" Differential cover. What is the difference? - the Early Units had the fluid fill in the housing. This cover has no provisions for a fill. Cleaned, Blasted, ready for paint or powder coat. Includes the 10 OE Bolts for affixing it to your axle. Asking $25 OBO plus...

For Sale: All 3 Rear F Body Coupe Windows. Can provide better / more detailed pictures upon request. No Chips, cracks etc. Left and Right Rear Side / Quarter Glass $50 Each Plus shipping from 15642, PA to you. Coupe Rear window glass without Rear Defrost $150 Pickup only. Can meet at a...

F Body Coupe Aspen / Volare Roof Panel removed with no cutting or slicing, all spot welds cut properly and removed with care. Fairly good piece, One dent above driver's door, see pictures. Asking $200 OBO Not Interested in crating or shipping, Local Pickup Near I76, Exit 67 in PA. If you are...

These caps can be tricky to find. I buffed them up a bit. If you can use them $20 or Make an offer plus shipping from 15642, PA There are only 3 and they are less than perfect.

Handles Have been Buffed and Polished to the best of my ability. NOT Show Quality - But they are are shiny! Parts look better in the pictures than they do in real life! $10 plus $8 for shipping. from 15642, PA to you. One Pair of 1978 -1989 Diplomat, Gran Fury, Caravelle, Lebaron RWD Inside...

Hello, Here are some 8.25 parts that I no longer need. All from an open carrier. (2) C Clips (2) Side Gears (2) Spider gears Center Pin and Retainer Screw All was removed from a '73 Polara with a 360. Gears all clean up and look good to me, no signs of abuse or abnormal wear. All parts cleaned...