Search results

I am selling my 1977 Aspen SE. It is located in Buffalo, N.Y. I have attached a description of the car and all work that has been done to it. Price $15,000

can anyone tell me if there is a problem with this site? I haven't been able to get on it for a couple of days Thanks Dave

Found one so I'm all set. Thanks dave

I'm looking for a speedometer/dash cluster for my 77 aspen. I need the speedometer & fuel gauge to be working. I have attached pictures of my current unit. Thanks Dave

Found the motor and trans I was looking for Thanks to all that searched for me Dave

Myron I am in the process of building a 360CI 160HP 77dodge aspen SE pure stock car to run IHRA(F/PS index 13.75). They are factored at 274HP in IHRA that's the same motor that NHRA factors at 289. Also and I can't figure this one out. The 360 in a 76 model is factored at 284HP in NHRA. if I run...

Just a reminder --- STILL LOOKING FOR THESE Thanks Dave

I guess the short would be I didn't go to something bigger. The lifters went with the 20-600-9 cam. I started out with a 20-600-9 cam which had a very rough idle and then changed to this cam. The set up it was in was 318 stroked to 390 with EDDY heads, air gap intake and 600 CFM quick fuel...

I have a small block Comp Cam #20-810-9 hydraulic roller cam for sale. The cam has less than 2000 miles on it and is in perfect condition. This is for the cam only I don't have lifters for this. Great street cam . The pictures aren't the best if you need more information PM me. $175 plus...

I have a set of unopened cat whiskers for a 76 - 80 Aspen/Volare 2 dr. Parts are by Steele Rubber Products #80-0593-57. $75 plus shipping. There current price from Steel is $159. Dave

Thanks again. I will contact both on Monday. Dave

Thanks please keep the tech info coming. I am super excited about this project. I want to take my time to get as many of the right parts as possible and assemble as much information to get it right. Maybe you could make one more suggestion. I have contacted Bullet Cam & Comp Cam about...

I have a little more info on the intake. I appears the top intake 3830945 AL or 3830945 L is an intake from cop cars in the mid 70's. With all the interest in these cars I'm hoping someone has some parts tucked away in their spare parts pile. The regular intake 3830945 from what I can find was...

I am looking for a mid 70's 4 bbl intake manifold. Hope someone can help First choice #3830945 AL next #3830945 next #4095080 Thanks Dave

These are the carburetor casting numbers that I am looking for #9004, 9015, 9076, 9093 Here are the applications that they were used on. I only need the bottom throttle plate because that is where the number is located, so if the bowl is warped it will still work for me. It should have the...

Thanks for all the info. First they will allow a 904 transmission or any version that was install in the 77 model. Second I'm not in a hurry , I just want to get the right stuff. I see this as taking two years so I can go to the races with my grandson. Heads I have heard that 596 were better...

Any updates on your weekend search? Thanks Dave

The rules are very tight in Pure Stock and the reason is they are trying to keep using only OEM stock parts for cost reasons. The short block can be any "LA" short block with max overbore of .070. I probably would not feel confortable with the condition of the block if I had to exceed .030...

I want to build a F/PS 1977 Dodge Aspen SE 2 dr to run in IHRA. Here is what I’m looking for and hopefully someone here can help me This is the E-58 option Best case would be finding a 360 motor (160HP 4bbl) and transmission from any 1977 through 1978 . It wouldn’t have to be out of an “F”...

Hope this helps. As close as I can guess with wifey holding the other end of the tape(she had it right on the money) my set up is 72 maybe at most 72 1/2". The tires are 255/60/15. The wheels are 8" with 4.5" back spacing. Dave

I used the following sizes and it has worked out pretty well Speciality Magnum Wheels front and rear 15" x 8" x 4.5" back spacing Front 255/60/15 Rear 275/60/15 A few pictures attached. Dave

Here is some info from parts I used on my project Some pictures of the 8 1/4" rearend in the car. -We installed 3:55 gears with an Auburn Sure-grip unit(some grinding was required to install this unit but you get real good instructions with the unit) -All new and used parts were blasted and...

Thanks, I'm happy with the results. Now I have to get some good weather around here so I get to drive it a little. Just got hit with 8" of snow this morning so it will take a while to melt and then I have to wait for a couple of good rain storms to wash all the salt off the roads. Dave

Thanks !! As it sits right now it pretty much fills all the goals I started out with. The preformance and handling are better than I expected when I started out with this project. On the negative side I pretty much doubled my budget. Thanks again Dave

Exhaust System These are some pictures of the exhaust system. The pipes(21/2") exit right behind the rear tires. You could put another bend and extend to the rear bumber but I like them kind of hidden. Dave