Search results

Fixed, thanks for the heads up on that!

Ok, so i here it all the time, "340's just dont make good torque". Well thats true, sorta. We got a call from a guy. He wanted a streetable 340, but wanted some grunt and didnt want to go with a stroker. We talked about this and that, he had some parts to work with. Some good some not so good...

For those of you who are in the know about A/F vs BSFC, It DOES NOT GET ANY BETTER THAN THIS WITH A CARBED BBM. This engine was designed to run as efficiently as possible on the street with this much power. I dare you to find ANYONE who can do better!

http://youtu.be/ykQo39iAVJI http://youtu.be/jPpsbWa0dd8 http://youtu.be/djzslPKoqI4

HAHA i wish!

So, you remember this little guy here right? http://www.forabodiesonly.com/mopar/...d.php?t=230105 Well its hot off the dyno And Im VERY happy with the results! Here is the basic run down 440 4.350x4.250 = 505 Mahle flat top pistons PEP 7.100 I beam rods RPM heads w/2.19-1.81 valves...

Git R Done!

Spring Time Special BBM 400/500 stoker kit for sale Kit has the following PEP/RPM 4.150" 4340 Forged Stroker Crank PEP/RPM 6.760" 4340 I-Beam Rods Total Seal Piston Rings Seal Power/Speed Pro Rod/Main Bearings JE Flat-Top Pistons 4.375" This kit is being sold NON BALANCED. You have...

Let me introduce you to our new line of engines, The Classic Cruisers. First up is our Classic Cruiser 360. They are our most basic, entry level engines. What does that mean? Well its basically a warmed over stock 360, but with some MRL Performance touches. They offer real good power, great...

This one was $9000 turn key.

Less than our custom builds.

.570/.580 at the valve

Here is one of our latest 408 Stroker. Nice combo, made some good power. You want the run down? Ya know you do! So here it is. 360 Magnum block with shaft oiling RHS LA style w/shaft rockers Lunati hydraulic roller cam MRL spec'ed Hyper dish pistons SCAT rods and crank ARP bolts PRW 1.6 roller...

Let me introduce you to our new line of engines, The Classic Cruisers. First up is our Classic Cruiser 360. They are our most basic, entry level engines. What does that mean? Well its basically a warmed over stock 360, but with some MRL Performance touches. They offer real good power, great...

Call us!!!! We can help. If you have an engine that does not perform the way you think it should, we can help you get it right. We have done a lot of this as of late, re-doing existing combos and get you the most power for your dollar. It cost less than a new engine, and we can always find...

Here is a set of MP Commando heads I got in a trade for some work. Im never going to use them. They have had some light port work done(not by me) and have guide plates and ARP rocker studs already installed. They are Magnum style heads, SBC type rockers and Magnum intake bolt pattern. They...

Bump Still for sale

Here are the dyno sheets

Yup you were very close. Thanks, we try to get the most for the buck. The torque is just awesome on this for the size cam. The Voodoo cam i wanted to run would have tickled 600hp.

560HP 547TQ http://youtu.be/XSnj02718I4 I will post the dyno sheet later

LOL Yup, just paint. This is what they wanted, Hemi orange with bare intake and heads.

Ok, here is another one ready for dyno testing. I know you guys like to guess the power, so here we go. 340 block 4.100" bore 4.00" stroke 422ci RPM heads Stage 2 ported w/2.055/1.60 valves 63cc measured Comp dual springs/locks/retainers Diamnod Flat Top Pistons 12.4 to 1 SCAT I beam...

Roller cams are not cheap, this was more budget type. If you need something specific, call and we can go over it. But remember, it takes time to get a quote and build ready for a customers approval. And as we all know, time is money.

You will not find a better deal on a real Performance 416 this complete and a real shop to back it up. Not like the Craigslist junk or Ebay scams. Its priced right and is making the power to roast the Ford and Chevy guys, not to mention your tires! If you know anyone in the market, send them to...

The color was chosen by an old friend that was in the hospital, she loved how it turned out. Plus I had a bit of the red paint leftover. It really looks good with the black. Bigger valves dont always make more power. Bigger cams dont always make more power. Bigger is not always better. It all...