5.9 magnum oil pan help needed

[beatersRus]

so ive been mocking up the build on my 81,
using a 318 magnum and have finally gotten a 360 magnum motor.
i think im in the home stretch to finally getting this car/combo together.

my questions would be,what mounts did you use to install,
currently,i have the 318 magnum in there on v8 mounts cut from another k frame.

and what oil pan AND oil pan pickup did you use?
is it Baffled or open?
do you have a link to where i can buy both?

i was reading about dakota oil pans.
is that a viable solution?
DODGE DAKOTA Dorman Oil Pans 264-233

 

[brotherGood]

You'll need an LA 360 car pan. Truck pans have the sump in the wrong spot. As far as what pickup, I'm not sure but I'd assume a 360 LA pickup (as long as it's for a car)

Modify your Dodge Mopar Magnum to fit your classic Chrysler. |

 

[beatersRus]

yes ty....
what no one seems to know is exactly where i can buy a new pan and oil pan pickup.
does Anyone have a link to these items and Knows they will work?

 

[80mirada]

at summit
Summit brand pan SUM-G3536

Melling Oil pickup 72-S2.

you can search any auto part website for a 1979 Dodge Aspen 360-4v and find the parts. You will need the LA pan gasket for it to seal properly

 

[Duke5A]

If you're looking for a baffled pan look at Kevko. I ran one my 360 for a number of years.

 

[mikedevore]

I run the rear sump magnum pan on my Stocker Volare.
we need the rear sump, since sometimes we only have 3 qts in the pan.