Plymouth3596
Member
Would my 87 Gran Fury possibly have a build sheet under the seat like they earlier muscle cars had or was there a year Chrysler stopped that. How hard is it to get the back seat out of the gran fury ? Thanks
Build sheet
- Thread starter Plymouth3596
- Start date
To the best of my recollection, they stopped including build sheets after 1983, although it's possible an '84 may still have one. I don't recall the exact changeover date when they went from alpha-numeric sales codes to alpha (i.e., A38 -> AHB), but it was during or just before the '84 model year. The data on the fender tags will give you the info you need anyway, along with running the VIN through the Mopar VIN decoder.
Rear seat is easy. Two hooks along the bottom. Push down and back to unhook, then pull up from the front. Seat back has 2 7/16 bolts at the bottom, two hooks along the top.
Rear seat is easy. Two hooks along the bottom. Push down and back to unhook, then pull up from the front. Seat back has 2 7/16 bolts at the bottom, two hooks along the top.
Mikes5thAve
Well-Known Member
I've never seen one in any of my 80s ones but some people have said they've found them.
Most stuff is on the vin tag and by the 80s there weren't all that many stand alone options or unique ordering ways like the older cars.
Most stuff is on the vin tag and by the 80s there weren't all that many stand alone options or unique ordering ways like the older cars.
Plymouth3596
Member
ok thanks for the help/info it does have a vin stamped on theradiator support
