MRL Performance
Well-Known Member
- Joined
- Apr 20, 2012
- Messages
- 51
- Reaction score
- 0
Contact seller
Here is a set of MP Commando heads I got in a trade for some work. Im never going to use them. They have had some light port work done(not by me) and have guide plates and ARP rocker studs already installed.
They are Magnum style heads, SBC type rockers and Magnum intake bolt pattern. They also have the square shaped exhaust port like all the rest of the Command heads(W2 Econo type). They are the std exhaust bolt pattern.
These are bare heads, no valves, springs ect. But they do have the guide plates and rocker studs.
$800 bare or $1300 complete with 2.02/1.60 valves beehive springs for just about any hydraulic flat/roller cam and some flat solids. I can also set you up with a set of roller rockers for a additional cost. Price on that varies depending on what type you want.
They are Magnum style heads, SBC type rockers and Magnum intake bolt pattern. They also have the square shaped exhaust port like all the rest of the Command heads(W2 Econo type). They are the std exhaust bolt pattern.
These are bare heads, no valves, springs ect. But they do have the guide plates and rocker studs.
$800 bare or $1300 complete with 2.02/1.60 valves beehive springs for just about any hydraulic flat/roller cam and some flat solids. I can also set you up with a set of roller rockers for a additional cost. Price on that varies depending on what type you want.