FOUND temp control lever

Status
Not open for further replies.

Charrlie_S

Well-Known Member
Joined
Jul 27, 2016
Messages
90
Reaction score
11
Location
silver springs, Florida
Contact seller
Looking for the lever on the heat/AC case, for temp control. It is held on the temp door shaft, and the temp cable connects to it. For manual heat/AC, not semi automatic. Thanks

Edit: Vehicle is 88 M body
 

marty mopar

Well-Known Member
Joined
Mar 9, 2011
Messages
362
Reaction score
61
Location
Tempe AZ
3847014 Heater Control Temperature
4443104 LEVER and KNOB PACKAGE, (Black) Heater Control

both above are levers for an M body

item # 9

upload_2020-6-9_21-41-13.png
 

Charrlie_S

Well-Known Member
Joined
Jul 27, 2016
Messages
90
Reaction score
11
Location
silver springs, Florida
I need the lever that goes on the heater case, not the control head. I'm going to convert from semi-auto to manual temp control. My servo motor went bad, again. The control heads are the same. Just have to change the lever, add the cable, and replace the servo with the lever I need. I have all the parts I need, except the lever that goes on the temp door shaft. I could probably make one, but it would be much easier the buy one. Making one would take some experimenting, as I don't know the length, or the orientation of the flats in the hole.
 
Status
Not open for further replies.
Back
Top