Mopar_Gods
Well-Known Member
- Recently replaced my manual fuel pump in my Aspen 2 Door Coupe because it had a hair line crack around the fuel line fitting. Now the fuel lines are not getting any fuel at all bone dry running from the fuel pump and from the fuel pump to the fuel filter to the carb also all bone dry. Any ideas on this anyone? This car being a mopar and a slant six I know There is no rod, Just The fuel pump arm rides on the bottom side of the eccentric on the cam. Your thoughts are appreciated I cant find anything wrong as to why I am not getting any gas at all. Also of course the fuel sending unit has been replaced and the gauge has a full tank of gas presently. I have also removed the inline at the fuel pump after cranking the engine a few times still no gas from the line. Also blew in the line for pressure build up. I have looked online for a diagram showing how the fuel pump lever should be under the cam but cant seem to find a picture my manual shows nothing just basic remove and re install which is two lines and a basic two bolt. Was thinking maybe I did not install it right but replaced new one after removing the old one. The one autozone sold me is angled a little different. Hope all is having a good spring and summer. I am doing a lot better after being very sick for a long time. Thank You
Last edited: