1980 Mirada $3500 - Woodhaven MI

GregG48213

Well-Known Member
Joined
Sep 28, 2017
Messages
101
Reaction score
50
Location
Detroit MI
Not Mine:
1980 Dodge Mirada CMX T top 318 Mopar Plymouth Hemi 383 440 - cars &...
1980 Dodge Mirada CMX T-top - $3500 (Woodhaven, MI)
This is a very original car with 83,000 miles on it that runs and drives well. 318 2bbl automatic on the floor with center console. It is Baron red with red vinyl bucket seats. Frames, floors and trunk are all super solid. The car had some damage to the front clip and hood, so they were replaced and need to be painted to match. Many mechanical items have been recently replaced including: radiator, water pump and hoses, thermostat, brake master cylinder, brake hoses, carburetor, full ignition tune up, rear shocks and more.
80Mrd_01.jpg

80Mrd_02.jpg

80Mrd_03.jpg

80Mrd_04.jpg
 

Duke5A

Well-Known Member
Joined
Apr 6, 2018
Messages
1,637
Reaction score
852
Location
Michigan
That is just down river from me. Rust is nasty though. I can't see $3500 or anywhere close to it.
 

MiradaMegacab

Well-Known Member
Joined
Feb 27, 2011
Messages
1,847
Reaction score
753
Location
Long Island NY
Nice!
You cut out for the tail lights and kept the F/G bumper molded in.
How was the overall fitment with the quarter panels and body lines?
 

MiradaCMX80

Well-Known Member
Joined
May 24, 2020
Messages
61
Reaction score
12
Location
Michigan
The red car listed is the one I just bought. Thats my car! 80Mirada....I'd like to know how you modded the plate area...there are currently no provisions for a license plate lamp on mine.
 

MiradaMegacab

Well-Known Member
Joined
Feb 27, 2011
Messages
1,847
Reaction score
753
Location
Long Island NY
ABEED143-61C8-4643-8046-AE6CF9499BAE.jpeg

Here’s what your VFN rear clip looks like. Obviously the fiberglass is cut to install the tail lights. Sometimes people go one step further and cut the fiberglass to retain the stock bumper. Looks like member 80Mirada sectioned in a stock license plate frame/bucket.
 

MiradaCMX80

Well-Known Member
Joined
May 24, 2020
Messages
61
Reaction score
12
Location
Michigan
Mine has the stock steel bumper too. The seller said it was "professionally installed." The fit looks ok, just wish they would have finished off the plate area and the trunk seal lip area...that will need to be addressed too.
 
Back
Top