parting 88 Diplomat

Status
Not open for further replies.

F body Deconstructor Jim

Well-Known Member
Joined
Jun 19, 2011
Messages
557
Reaction score
135
Location
Phoenix, AZ
There ya go....dash harness looks very nice with one repair on a 4 wire plug (first picture)
Also have the forward harness that attaches to the bulkhed connector on the engine side (2nd picture)...and the tail light harness...and the door lock harness...(not pictured)

100_1008.JPG

100_1009.JPG
 

65 Dartman

Well-Known Member
Joined
Feb 27, 2011
Messages
180
Reaction score
6
Location
Strasburg VA
Thanks for the pics. I would be interested in just the dash harness which I would modify as needed for use in my 47. I can't quite make out where the harness connects to the turn signal and ignition harness on the column as I will be using a J Body tilt column. The engine and tail harnesses will need to be custom fabricated.
 

65 Dartman

Well-Known Member
Joined
Feb 27, 2011
Messages
180
Reaction score
6
Location
Strasburg VA
Not sure what's going on, but I never receive any email notifications that a thread (like this One) received a reply. So thanks for the pics of the harness. I guess the ignition and turn signal plugs will install into my 80 J Body column. PM me with a price and I will keep checking this forum when I check into FABO.
 

bschubarg

Member
Joined
Mar 9, 2011
Messages
20
Reaction score
0
Location
Winston-Salem, NC
Status
Not open for further replies.
Back
Top