Recent content by 77RTNJ

The magnum will fit, you should just need the correct mounts. There are ways to get the fuel injection to work if you have the whole harness and computer. The auto transmission that would be behind it is a A-518 4 speed overdrive automatic. It will fit our cars too, but you must remove some...

here is just the center button for one on ebay http://www.ebay.com/itm/NOS-82-83-Dodge-Aspen-10-Spoke-Hubcap-Center-Decal-4213416-/320831802462?hash=item4ab310cc5e&item=320831802462&pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr

would also fit the late 77 and 78's just would have to bump the trunk floor just a little for the rollover valve and extend the vent hose to the rollover valve. Kevin

You should black out behind where the grille will be on the radiator support. That is the way it was done at the factory on every car except black and dark blue. Usually a satin black is used.

You can also redo the torsion bar mounts with poly from polybushings.com

They won't fit yours unless you are goint to swap the whole front end. see my previous post above. Look for 76 -79 fenders.

1980 are different from the 76 to 79 fenders. These fenders will not fit without changing over the whole front end. They will bolt to the car, but you need everything to change it to look like a 1980 on a 76-to 79 car: fenders, grille, bumpers, hood and corner pieces. Plus probably bumper...

looks like the car that was for sale in Delaware last week for $7k.

I would clear out the engine bay fix all the bad parts and coat with epoxy primer. then give everything else a good sanding and a good coat of paint. front fender and cowl areas are prone to rust so clean them well. I will be pulling my motor soon to fix the engine bay up like new. Kevin

That is the precise reason for this thread and similar threads on other Mopar sites. To let everyone know of loser Mark and not to deal with him. If he really was the type of person these people keep defending him as he would step up to the plate and refund Joe's money immediately. He must...

sorry Scotty it is everyones business at this point. It is so they Know to keep away from him. Just wait till the day you wind up on the wrong side of him. It doesn't take much. Just give somebody info on this site that you learned from his site. That is all I did and I got banned. There...

One of those 100 members, many who are also on this and other F-body sites need to get on his ass and tell him what a loser he is. They just need to be ready to be banned from his site.

Any F-body built after 4/1/77 has the M-body style trunk floor and gas tank. No more hump and no more spare tire well either.

My plan is to use the JEGS A-body kit on my 77 Aspen. Mine is a late build 77 that does not have the hump on the gas tank or the Spare tire well. It is just like the M-bodies, so I will move the tank over one rib. My tank does not have the little hump in the center of the tank, that is for...

Ramenth, what i have read is that the frame itself is ok, it is the suspension pieces that are not up to using as a daily driver. Ok for a show or drag car. Plus the cost is outrageous. I have no problem with the torsion bar setup, just would prefer a rack over the old gear. I think mopar...