Recent content by kitcar43

chris where do you get the rubber for the hood pins you reproduce been trying to find it for the third set I have

contact phillip lanquist he has the measurements for the rear spoiler

I have always just put a oring that will fit up against the flat surface and eliminated the gasket ,as long as you don't over tighten the distributor hold down clamp it works fine.

My 67 GTX has a 452 with a 727 manual valve body with a 3500 stall with hoosier drag time slicks 33.0 16.5 -15 rear is dana with 5.30 gears the wifes roadrunner has a 318 with 10.1 compression with magnum heads a 3200 stall 727 with a manual valve body 4.56 gears with 28.0-9-15 mickey...

After changing the springs and replacing the converter ,converter cracked around the snout ,also removed the power steering and removing the clutch fan and adding a electric fan she has had it back to the track it picked up a half a second I guess I will let the wife run her car and stay with my...

a few of the wifes

man you are lucky as hell that is a 400 to 600 dollar grille damn i sure wish i had found that.

Well our local track opened back up this saturday we took the wifes Roadrunner to test and tune , didnt go well the wife was leaving off idle ,i thought the car was falling on its nose out of the hole so i took it for a pass, the wife says her burnouts was all the car had in the bleach box...

250.00 is a good price i sold a housing 10 years ago without center section or backing plates for that price , also i know where you are coming from on spending money my work just told us no overtime and to pinch pennies ,but wait our great president and our democrats are saying our economy is...

40s today but no snow in the immediate future all we have seen is some flurries we usually get a couple inches before winter is over march is when everything fires back up for us.

do the kits that jegs sell for the a body work in our fbodies i will be taking out the 8 and quarter and the putting the 8.3/4 from my 77 roadrunner in my wifes 80 roadrunner and was wanting to go with super stock springs. i will be going from 4.10 gears to 4.56

if patina is worth alot then i am already a millionare with all my junk.

the pics he has are a couple years old i had new pics of car about a year ago and it is covered in surface rust it has been sanded to bare metal on the top and hood and left out in the weather.and he has stayed at the 2500.00 dollar price ,i was going to buy it until he sent me the new pictures.

thats just wrong a superdoba thats not even funny

car has been sold thanks for all the interest.