Search results for query: *

amazing stuff. other than cleaning off the oil/grease there is nothing to do. this was 48 hours soak.

as a side note, Evapo-Rust soak does work

wait, these are worth money?

i have the kits, i know where the bushings go, except two, there are two round bushings. they don't fit the lower or the upper bushings, where do they go?

22" inch springs are required with the kit., the 20" SS ones are too short. check my build page, start at page 2

a roller cam the lobes are flat with no taper. if you run roller on a flat cam the contact point is too small and will burn the cam and roller

Looks perfect

imagine that wheel but in light blue, what i am using ATM

I THINK YOU ARE RIGHT, I HATE FACEBOOK

Mustang brothers build darts?

this is the part that bothers me, Australian bought a motor? but still 48 left in stock??

anyone heard of these guys? i dont really want the engine, but for the price of Edlebrock heads, you get everything else.

i need a new wheel, the original blue OEM wheel is wrecked beyond repair. what's a good replacement? like an old Grant GT or similar.

as title says, large front bar (and brackets). oldskool large Addco is also fine

the roller motors are pedestal mounted, the flat tappet motors are shaft mounted

wasted more money. only need to make the swaybar mounts and exhaust, then on to the front

it would not go in all the way. stuck out ~1/2 inch. the machined portion was the wrong size

BTW, these DO NOT fit.

your biggest worry is the cam and lifters getting wiped out. today's oil does not lend well with fresh lifters/cams

leafs are in. sliders in. just waiting for the shocks, which will be a couple of weeks. swaybar brackets/links/bushings. brake hose and lines. but it is on its wheels now

CB525C - 5.25 Inch Component Speakers – Small Size, Big Sound!

latest. hopefully the sliders get bolted up by tomorrow night

before and after. just a test fit to see it i should send it. seems as though the car got a slight lift, which is what i wanted. i took it all apart, welded, painted and now in the process of installing. need to wait for the nut-serts to arrive to hang the spring sliders

you gonna get rid of the wheelie or just ride it out going forward?

87 will work ? 11in drums?