Search results for query: *

If you have the models, grilles could be made with 3D printers in some types of plastics. Some of the higher end printers can print metal, or if there is enough demand, even go to MIM (metal injection moulding, a mix of wax and metal powder get injected into a mould, the shape comes out and then...

Is this on Safari? If so, consider using another browser (Firefox, Chrome, Opera, etc.). If it still persisists, you either have a DNS or search engine redirect, or your Phone has been hacked. In those instances, you may want to consider getting a DNS redirector of your own (suggest 1.1.1.1), a...

People may want to keep in mind that not all build sheets are under the rear seat cushions. They are (far less often) found in places like inside the headliner, as an example. So pulling out the rear seat cushion doesn't mean the car doesn't have one, it just may be in another place.

I think for our cars, the tillt wheels are from Saginaw (GM parts supplier), so a GM steering wheel adapter kit would be the right one. I don't know about the non-tilt wheels.

It all comes down to what you are used to. Calgary just came out of a cold spell, where the daily high didn't get above -17C (about -1F). Today, it was almost summery at +4C (about 40F). I don't have a lot of issue with cold temperatures, but really hot weather gets to me (above 85F). I am used...

Fenders for what make, model and year of car?

Spikes in cars come from the alternators themselves, or regulators, or can come from various electrical motors and heavy electrical loads (for example high power car stereo amplifiers) switching on an off. When a heavy electrical load switches off, it can cause the voltage in the car to...

Some K-Cars have useful power brake boosters/vacuum cannisters that can be used to create a little bit more clearance between the top of the valve covers and the original brake booster.

Is it possible that the shortened driveshaft is out of phase? Also, if you have the original torque converter, you can try to re-install it and see if it makes a difference. 360LAs, being externally balanced, normally do have weights on the torque converters, and the B & M flex plate should have...

Looks like whole front clip messed up or can it be straightened out and just the grille can be replaced. Its far easier to just repair the grille. Hard to tell if the whole clip is just bent, or if it has to be all replaced.

Has anybody noticed any issues with the phenolic body of the TQ 4 Barrel and Ethanol? Its a question that has been floating around in the back of my head for a while. If ethanol can eat the older rubber fuel lines, does it do anything bad to the phenolic body?

is it possible that these are traction bars of some sort? I don't see if the "tensioners" are going between the axle and the front leaf spring eye, or between the axle and the rear leaf spring eye. This part of the description is really confusing: "...shackle and the torsion bar and looks to...

The F/M/J body transverse torsion bar front suspension was intended to have a "big car ride". The big cars (C bodies in Mopar Speak) were also softly sprung, huge beasts( i.e. the suspension was designed to be that way). To get that desired (by Mopar management/sales) ride, they created a...

The F/M/J body transverse torsion bar front suspension was intended to have a "big car ride". The big cars (C bodies in Mopar Speak) were also softly sprung, huge beasts. To get that desired (by Mopar management/sales) ride, they created a suspension that was basically made of marshmallows. Come...

You may be able to check if you have a clogged line by taking a compressed air blower gun, and putting it into the open fuel line and giving it a short burst. With somebody standing near the gas tank (gas cap off), they should be able to hear the air bubbling out. if the fuel line is clogged, or...

Really? a 4 door 1981 Imperial? Somebody should snap that up. Wait a minute.... seems like 2 doors are missing. On a more serious note, I wonder if it has the problematic digital dash, or if the coversion to a carb was properly done? They are really nice looking cars, if a little too close to a...

Intermittent electrical connection, by the sounds of things. Check the nuts and the screw posts on the coil, and the terminals on wires that went to the coil. Make sure they are all clean and shiny. Just a thought from the problem description. I suppose it could be an intermittent screw post...

In the IT world, it was sometimes called PEBKAC, Problem Exists Between Keyboard And Chair.

Really good band, and for this song at least (they actually have a lot of great songs with good lyrics), really great lyrics. I think their debut album, although unrecognized by most, has to have been one of the best debut albums of all time. Great band, great lyrics, with great musicians...

A header setup can provide some horsepower gains over a manifold setup. How much is dependent on how restrictive the manifold set up is, some of which has to do with is the facotry a real dual exhaust all the way back, the design of the original exhaust manifolds, the design of the headers...

5 X 4 1/2", like all old school large bolt pattern Mopars. In Imperial, not metric.

I don't know if you were talkingabout the AHB only cars, but my 1980 Cordoba Crown has an A998 in it with its 318-4BBL. My 1981 Mirada CMX has an A999 along with its 318-4BBL. These are all factory original, the transmission codes on the fender tags show them, and I've been underneath and can...

"Don't Let Go" has to be one of the most beautiful duets that exists. Both Peter Gabriel and Kate Bush are outstanding on it. I'm a big fan of Kate Bush anyway, and have liked Peter Gabriel for a long time, so its great to hear them together.

"Steam" seems like a direct lead in to "Big Time". I really liked the earlier Peter Gabriel material, especially between his leaving Genesis and through to the "So" album. Personal favourite is "Shock the Monkey" when Gabriel was playing around with African/World beat type music. His videos are...

A bad bulb would normally cause the right blinker to flash more rapidly than the left. Its either a wiring issue, a turn signal switch, or the flasher itself. I suppose in some odd cases, it could be the socket. I'm betting on the flasher, which is cheap and easy to fix.