Search results

may have been a FABO thread. there is an extensive one detailing the modification to the torsion bar / transmission mount

Id love to see a picture of her!

This ones been in the kijiji forsale for quite some time but looks to be in decent shape for being in Ontario (Its not mine and dont know the seller and I havent enquired) 1979 Dodge Aspen R/T with rebuilt 1969 318 engine 727 Trany | Classic Cars | Kawartha Lakes | Kijiji

I run an open air filter and dont get a strong gas smell (there is a little because my Eddy carb does not have the provision for venting to my charcoal canister). I'm in agreement that its either a leak, possibly a high float, or fuel boiling. Can try a higher premium gas (I dont use E85 garbage...

And DrDiff has a shim pack Mopar 8 3/4" Cone Sure-Grip Shim Pack

Here is RRR's write up over at FABO How To Recondition a Sure Grip Cone

AWESOME write-up BudW!!! Thank you very much! I think I will be looking for the Liberty setup as there seem to be many showing up at my local pick'n pull lately I think this should be made a sticky for sure.

Awsome! Thank you

@BudW What years should I/we/people look for, for the rear disk brake assemblies from the Jeep Liberty's and Grand Cherokee's? Thank you :)

I hate that from sellers "pictures available upon request" Just post a few pictures on your freeking ad already! It's not that difficult for christ sakes! ….sorry for the rant.... If I were closer Id message the guy and go take a look for you

I know I wont touch a steering column on any car with an airbag... scares the crap out of me

There is not much that can go wrong with the cruise circuit... If your speedo works then your cables are good I've only ever seen these not work because of chewed up/disconnected wires (and there's really only a few wires) and a servo gone bad (which is what I've seen most often) The big...

Will send you a PM

I have a couple sets but I'm up in Canuckland so I'm not sure what postage would be like but asking for $100 CAD plus shipping per set. They include the caliper brackets and fasteners. I do have rotors too but shipping would be prohibitive because they are relatively easy to find at the...

The Spectra (if not a Chinesium counterfeit) is made in Canada and should be a quality piece. They specialize in gas tanks themselves tho.

Although not the same as your as this one is for 2sp BBody, but I hope it helps you with your installation...

I don't know why anyone would want to put the Kframe from the FMJ onto an A I have a 76 Dart and the reconditioning of the A body suspension is WAY cheaper and MOOG still produces ALL the bushings required

Depending on the bar numbers and the price I may be interested in the torsion bars and perhaps the large caliper adapters (if so equipped with the slider type for 11.75 disks) :) And yes 73-79 B suspension will be similar

oops cant delete this

Just find some 8.75 shock plates, tack weld washers in the oversized centering holes. See the 8.75 shock plates for sale all the time on FABO you will need different shocks as well

Yes the kcar booster is a good and easy to find part, the bolt pattern is VERY close to the original you may have to file the edge of the holes but really a non issue. you also get to use the aluminum MC!

Oh I forgot to add This was from an 87 with 318 and is the same one I was able to get in my 76 Dart when I put a 318 into it. it was a squeeze for sure. I have this one just in case I boogered up the one I used in the Dart because it was in and out and back in and back out lol

Here is my rad I’m not sure what measurements you need specifically but I’ll offer up this: Actual core measurements 26x18.5” Top of the tank to the bottom of the tank at its tallest excluding the filler 22.75” Width of tanks just shy of 26.5” but with the bracing 27.5” Total mounting width...

I have an original with shroud at home and will post the dimensions with pics tonight for ya

don't forget to separate the steering shaft from the steering box before dropping the assembly!