http://cleveland.craigslist.org/pts/4498296787.html. I'm a B-body guy and if they were for my 70 Road Runner I would be all over them. If somebody wanted me to pick them up and hold them until they can get here, I would do that for a commission.
76-80 F body NOS front fenders (not mine)
- Thread starter gregs70
- Start date
- Status
Jack Meoff
Mopar Maniac
'76-'79 yes...but those won't fit on an '80.
Mr.Lopar
Well-Known Member
They will...youll just to change out the rest of the front clip
Jack Meoff
Mopar Maniac
I always heard otherwise but you'd know better than me.
Mr.Lopar
Well-Known Member
you'd have to change the hood, header, grille, and bumper to put the 76-79 fenders on a 80...basically the same thing I did to the stinkin lincoln
Jack Meoff
Mopar Maniac
So it's not a straight swap.
Jack Meoff
Mopar Maniac
The hood on my Volare is completely different from my M's.. :confused3:
Jack Meoff
Mopar Maniac
I'd say you're 100% on the M interchange for the fenders.
They look the same.
But yes the hood has a front lip on the 80 Aspolare (love the name)
And the M does not...
Mr.Lopar
Well-Known Member
76-79 front clip is a direct swap to a 80
and the 80 fenders are the same as Ms, dips/gran furys as they don't have marker holes/vent holes like 5th aves
and the 80 fenders are the same as Ms, dips/gran furys as they don't have marker holes/vent holes like 5th aves
Jack Meoff
Mopar Maniac
So you could use this fender on an 80 but you'd have to swap the clip as well
In other words....make it an 80?......in the front anyway...
Mr.Lopar
Well-Known Member
you can bolt any F/M clip on any F/M car
you can put the 5th ave front clip on the volare and vise versa if you really wanted to
you can put the 5th ave front clip on the volare and vise versa if you really wanted to
Jack Meoff
Mopar Maniac
Mr.Lopar
Well-Known Member
no altering needed, bolt right on
just like you can cut out a F 4spd hump and weld it right in an M
an M and F are the exact same from the back of the front seats to the radiator support, regardless of sedan/coupe/wagon
just like you can cut out a F 4spd hump and weld it right in an M
an M and F are the exact same from the back of the front seats to the radiator support, regardless of sedan/coupe/wagon
You don't need to alter the fenders. They bolt on and match the body lines of the doors. No mods necessary. F/M sedan/wagon front doors are the same from 1976-89, rears are the same '76-'79, and coupes used the same doors throughout production. Other than trim differences and rooflines, they're pretty-much the same damned car.
Jack Meoff
Mopar Maniac
Good to know.....
Part interchangeability is a good thing when they're not making any more.......
Thanks guys!
Part interchangeability is a good thing when they're not making any more.......
Thanks guys!
Mr.Lopar
Well-Known Member
yessir
alf44
Well-Known Member
f-m- all same platform,just the skins n trims differ
Jack Meoff
Mopar Maniac
See?....you learn something new everyday. :read2:
- Status
