anyone have a REAR sway bar link kit part #

[bnichols]

anyone have a part number for a aftermarket ie: napa autozone etc rear sway bar link complete with the stud etc????

 

[Yellowdart69]

I checked the numbers written on my Mopar package, if that helps:4057086 and 74455 0191. Are those numbers of any help? I have an '82 Cordoba.

 

[ramenth]

Got a part number through Advance's website for Energy Suspension.

http://shop.advanceautoparts.com/we...spension_17360829-P_N3435C_P|GRP60035_____BBV

Got a Moog part number on Summit.

http://www.summitracing.com/parts/MOG-K7087/?rtype=10

I'm surprised that Advance doesn't have a Moog # whereas Summit does. Advance is where I buy all my Moog parts.

 

[bnichols]

the advance one and the moog part are both fronts i did find a set of nos ones actually 2 sets so i bought them.

 

[bill55az]

Have the AZ people look up the FRONT end link kit for a mid 90's 2wd S10 pickup....cheap, and almost identical to FMJ rear endlink kit...

 

[bremereric]

My ES end link kit showed up today. I opted black. The bushing is backordered till the 21st. It's a one inch bushing in black. 9.8149G is the part number for this end link kit.

 

[Erics5th]

I thought the spacing was around 3.5"? At least thats what I used.

 

[bremereric]

I thought the spacing was around 3.5"? At least thats what I used.

My Mopar Performance one was at 4" and this is at 4 1/4". DCH-65 used it on his car and it works perfect.

 

[bremereric]

Finally got the brackets from Firm Feel just took pics and did not get to slide them under the car yet. 75 bucks to the door was fine by me.