Bell Housing/TQ coverter/Starter Bolts

[Bruceynz]

Hi Guys,

I need to buy some bell housing bolts for my 904 to 360, can anyone tell me what spec the bolts are and what I need to buy? Thread and length?

Also the spec for the TQ bolts, are they high strength and also the starter motor bolts?

Thanks
Bruce

 

[80mirada]

Order correct torque converter bolts from Summit, trust me on that one. I will look and see of I have some of the others in my hardware.

 

[80mirada]

for the bellhousing, ;4pcs 3/8"-16 1.375"oal, 1pc 7/16"-14 1.5"oal, 1pc 7/16"-14 1.75"oal,

They are available as a kit from ARP at Summit.
http://www.summitracing.com/parts/arp-144-0901?seid=srese1&gclid=CLjUycCOq8oCFcQlgQodavcPjw
or buy grade 8 at the hardware store.

Torque convertor bolts
http://www.summitracing.com/parts/arp-240-7301

For the starter ,IF I remember correctly, the upper was a 7/16"-14 stud with fine thread for a nut on the starter side, and a 3/8" bolt on the bottom, but I can not find the sizes on them. I know they were the same for v-8, v-6 and slant six