WANTED Looking for Upper Control Arm Spacers

D

Dippy Daddy

Active Member
Joined
Apr 5, 2021
Messages
29
Reaction score
5
Location
Cleveland, OH
Contact seller
Hey Folks,

Hoping to find two pairs of the Upper Control Arm Spacers, parts numbers 4014352 & 4014353, for my '86 Fifth Avenue. She has the usual problem, car has 198,000 miles and I can't get enough camber in the front end. Raised up the ride height with the torsion bar anchor adjustment, which improved things, but I'd still like to install the spacers.

Please let me know if you have some for sale, or know where I can get them.

Thanks,
Scot
 
This outfit has the 352 spacer, but only 1 it appears, and no 4014353. Can't get the darn attachment to post. Enter Mopar 4014352 in the search on Ebay, and scroll down 3 or 4 lines.

I had to put the spacers in a few years ago, and it put the camber, and also the toe, exactly back to where they were when I originally lined it up back in 2012. Got lucky and found all 4 from the same vendor (on Ebay).

Go to the chassis and suspension section. First thread is Alignment problems?, and scroll down a ways on page 1, there's a diagram BudW did with all the dimensions if you need to make your own.
 
Last edited:
Aspen500 said:
This outfit has the 352 spacer, but only 1 it appears, and no 4014353. Can't get the darn attachment to post. Enter Mopar 4014352 in the search on Ebay, and scroll down 3 or 4 lines.

I had to put the spacers in a few years ago, and it put the camber, and also the toe, exactly back to where they were when I originally lined it up back in 2012. Got lucky and found all 4 from the same vendor (on Ebay).
Click to expand...
Yes, I saw that auction on ebay for one of the 4014352 spacers at $15. I really want to get all four and do both sides of my car at the same time. My toe-in is actually dead on the money, but camber & caster are hopeless. So I hope to find all four from one source, as you did. Thanks.
AMC Diplomat said:
Link: Alignment problems?
Click to expand...
Hey, thanks for the link to the alignment problems thread. I can only dream of having the means to make stuff out of quarter-inch steel plate. I'll be very happy if I can find the spacers for sale. The guy on eBay who has the 4014352 part has more than one for sale, so I might just get two from him and keep looking for the 4014353 spacer. Sure wish someone would repop these for reasonable money.
 
AMC Diplomat said:
Literally any metal fab shop can make them if you dont want to make a crude set with an angle grinder and a drill
Click to expand...
Last night I decided to order two of the longer ones (4014352) from the guy on eBay who had 'em for sale. So I'll have those by the end of the week, and I could take them and the drawings from the Alignment Problems thread to a fab shop to a local fab shop and see what they can do. I'm near Cleveland Ohio, so I'm sure we've got shops who can do this.
 
You must log in or register to reply here.
Back
Top