WANTED M Body Cold Air Intake Flange

[Fresh Air Inspector]

Hello All,

I plan to have a cold air intake system with two intakes. For this I need a second cold air intake flange to mount on the inside of the passenger front inner fender. See picture below.

Let me know if you have one and the price. I recognize that the shipping costs will exceed the value of the flange.

 

[volare 1977]

I may have one but have to check

 

[Camtron]

If the one is still good on my car, you’re welcome too it. I haven’t been out in the garage lately with the low temperatures, but I will check later this afternoon.

 

[imperial416]

Have you found this flange yet ?

 

[Camtron]

Have you found this flange yet ?

I did! my applogies, completely spaced. Will send a picture when I get home. It is indeed intact on my inner fender

 

[Fresh Air Inspector]

Hello Camtron,

Thanks for getting back to me. I was giving you some time because of the cold weather you were having. I will send you a PM with my mailing address, etc.

 

[Camtron]

Still there, no cracks. Just hit the screws with penetrating spray and should be able to pull it tomorrow without issues

 

[Fresh Air Inspector]

Hello Camtron,

Hope the penetrating spray did the trick - those little Phillips head screws can be a pain if corroded.

I notice the car in the picture has cruise control. Is this a parts car or one you plan to repair / rebuild? If not, are you planning to harvest parts from it? I'm looking for the cruise control servo, mounting bracket, throttle cable and speedometer cable (from transmission to servo). The speedo cable I need is the one with a threaded ring on each end NOT the one that 'plugs' into the speedometer drive gear (fleet applications), on the transmission end and has the threaded ring for the servo. I might also be interested in the AC system if it has one.

Thanks again.

 

[Camtron]

Hello Camtron,

Hope the penetrating spray did the trick - those little Phillips head screws can be a pain if corroded.

I notice the car in the picture has cruise control. Is this a parts car or one you plan to repair / rebuild? If not, are you planning to harvest parts from it? I'm looking for the cruise control servo, mounting bracket, throttle cable and speedometer cable (from transmission to servo). The speedo cable I need is the one with a threaded ring on each end NOT the one that 'plugs' into the speedometer drive gear (fleet applications), on the transmission end and has the threaded ring for the servo. I might also be interested in the AC system if it has one.

Thanks again.

No, not a parts car. Was my daily driver, haven’t driven it in over a year now. Blew the trans, took my sweet time putting a new one together. Finally have the new trans mocked in the car and have to finish bolting everything in. Injuries and a growing family and work schedule keeps me away from the garage most days now; unfortunately. I’m actually at the ER with my wife currently dealing with pregnancy issues but, should have time to pull it off and get it boxed up tonight/tomorrow.
Sorry for the delay, her and our son were sick all weekend and I got to play Nurse for the house.

 

[Fresh Air Inspector]

Hello Camtron,

Take your time - family comes first. Hope all goes well.

Take care of yourself and your family.

 

[Camtron]

Hello Camtron,

Take your time - family comes first. Hope all goes well.

Take care of yourself and your family.

Appreciate that.
Naturally one of the three screws is stripped. I’ll bring my left hand drill bits home tomorrow and pull it out real quick. Should have it in the post Saturday.

 

[Camtron]

She’s off in one piece

 

[Fresh Air Inspector]

Hello Camtron,

Many thanks for the follow-up. Will send you a PM with shipping info, etc.