Radio connections, electric antenna G22

Mikes5thAve

Well-Known Member
Joined
Mar 3, 2020
Messages
1,718
Reaction score
703
Location
Canada
No problem. That sounds about right.
I need to dig into the wiring myself at some point down the road because my truck has an aftermarket radio i want to put back to stock and I'm sure they've messed with the wiring for that.
 

Gunnar Schroder

Well-Known Member
Joined
Apr 22, 2023
Messages
95
Reaction score
35
Location
Norway and Sweden
Good to hear from you and I will send you feed-back later when the antenna is in Place. I am positive it will fit. As I see it there is no other solution.
 

Gunnar Schroder

Well-Known Member
Joined
Apr 22, 2023
Messages
95
Reaction score
35
Location
Norway and Sweden
An unclear scheme I made for my own memory and simplified

Skjema forenklet slik det skal bli.jpg
 

Mikes5thAve

Well-Known Member
Joined
Mar 3, 2020
Messages
1,718
Reaction score
703
Location
Canada
It doesn't feed to 2 different fuses like your diagram shows. The X12 20BK/R goes to red wire of the radio which was previously connected to the fuse. Which is where the X12 20R wire now connects.

20240920_105858.jpg
 
Last edited:

Gunnar Schroder

Well-Known Member
Joined
Apr 22, 2023
Messages
95
Reaction score
35
Location
Norway and Sweden
Sorry Mike for dropping a clanger. The original red was already connected aleady to fuse 11! I am looking forward to checking it over on wednesday. So the other from the Contol box just connect up with the one already in use?
 

Gunnar Schroder

Well-Known Member
Joined
Apr 22, 2023
Messages
95
Reaction score
35
Location
Norway and Sweden
Time for updates before winter sets in:

I have found several other parts for the old girl. Thanks to Arizona Spares I found the Antenna control Box pluss several other small parts. Excellent service and helpful.
Now to the radio again. It works splendid with the fixed antenna. No problems at all as that was what was in the car when I got it.
A different kettle of fish will be to get hold of the original connectors to make a perfect restauratin.
For that reason I am looking for the old style connetors. A small glimpse may be seen from the attached photo; the brown one to the left and the white one in the middle. Another one
that I am after is a 6 pole one (Male and Female) for the speakers.
If anyone of you have a clue of where to lay my hands on them please advice me.
Thanking you all for any help and if you have what I am after in a shoebox or stacked away somewhere, please drop me a line.
Safe driving and soon we shall have winter roads over here.

20230528_195429.jpg


il_1140xN.5758288018_ec3s.jpg
 
Last edited:
Back
Top