Timing Chains?

77 Dragracer

77 Dragracer

Member
Joined
Mar 9, 2011
Messages
18
Reaction score
19
I've been running a double roller JP Performance timing chain in my 408 and after 7 yrs of racing it's time for another chain assembly. What brands do people here like to use?

Brad
 
I've got a Comp Cams Magnum double roller in my car, no complaints although it's not a drag car. Added bonus, MADE IN USA!
 
Cloyes?billet?<- some peope on the forum say they stretch... Rollmaster?? SA gear?? are supposed to be good. I keep forgetting the difference between a true roller and a double roller which are the terms that come out

but in addition, get the mopar timing chain tensioner, and use the correct bolt, with the oil-thru hole...

milodon has a gear drive, I think you would run a crank timing sensor if you had to run one of those and high rpm's
 
Last edited:
bump. :)

I am thinking about doing the chain and timing cover gasket/seals on my 88 5th. Is that mopar timing chain tensioner you mentioned small block universal?

Does it replace an inferior stock component? did the stock engines not come with a tensioner? or just a worse one?

Thanks!
 
There's no tensioner on a stock 318. The tensioner is a great and almost mandatory addition. I've heard from a couple of folks who swear by them. I'll be putting one on my Fifth when I do the timing chain.
 
The tensioner replaces the camshaft thrust plate. Bolts on using the same holes. It's a thrust plate and tensioner assy. I just added one to my truck ('96 Dakota) 3.9L to cure the dreaded chain rattle at idle (also replaced the chain and gears obviously)
Mopar didn't put any kind of tensioner on until 1997 and then it was only on the 3.9L (I think). However, it retro fits.

So,,,,,,,,,,,,,,seeing as the Magnum engines are basically the same (short block wise) as LA engines, it should work on those as well. One thing, with the tensioner it's a B*TCH getting the chain and cam gear on, lol!

Tensioner looks like the pic. It's Cloyes brand and pretty sure I got it from Rock Auto.

DSCF0001.jpg
 
Well then it is $44usd well spent ;).

It would appear a double roller timing chain is only for extreme horsepower machines, or when a WILD cam and valve springs are in play.

Stock-mild can get away with a single roller setup.
 
I read that Cloyes makes them for MP. 24.99 at Rock Auto. I just did my timing chain. I used a Cloyes double chain, tensioner, replaced all belts, water pump, fuel pump, hoses and put a sleeve on the harmonic dampner for around $150.00 through Rock Auto, I love their clearances. I figured I was right there so I might as well get it done.
 
lowbudget said:
I read that Cloyes makes them for MP. 24.99 at Rock Auto. I just did my timing chain. I used a Cloyes double chain, tensioner, replaced all belts, water pump, fuel pump, hoses and put a sleeve on the harmonic dampner for around $150.00 through Rock Auto, I love their clearances. I figured I was right there so I might as well get it done.
Click to expand...

Always a great idea to replace wear-parts if you already have half the front of the engine torn off.
 
You must log in or register to reply here.
Back
Top