Search results for query: *

I see three cracks running to the bottom of the cylinder, looks risky to me, if you sleeve it I would expect problems with water in oil. I see a junk block.

Body lift is more than likely controlled by the leaf springs, I use SS springs with the appropriate hangers but the rear hangers have always leaned slightly forward. I get four or five inches of body lift from the rear springs with the car capable of running 1.3x 60 foot times. Do you have you...

I would recommend having your vehicle weighed, I suspect a curb weight of around 3,700 pounds, and then you can go online and figure out how much horsepower is needed for your goals. The suspension needs for drag racing is completely opposite that of autocross. My Volare has a curb weight of...

Welcome, what type of racing are you into?

Have you tried the local glass shops?

You can build a 500 hp + small block or a 600 hp + big block with these books using your iron heads, stock rods and crank. The Engine book will reference cams you might be able to locate on eBay but cam companies all have at least one guy that can help you find something that works similarly or...

I’ve never been a huge beer drinker but liquor has always been a road to the devils den.

Photos would be great, I’d like to see a magnum installed in an Fbody and what it takes to do.

I’d say that some of us are slow learners.

The pineapple sounds good but I believe I’d have it with tequila, but that’s a night best forgotten… lol

This place needs a little verity after all it’s the spice of life. This song was on pop radio when it first came out in the early seventies.

Your Irish Car Bomb looks like a great time and I’m betting that the second one would be more fun than the first. Hang in there JW

Could be a nice driver?

Looks like the bumper could take out the oil filter in a small fender bender making it in drivable. Ford did something similar with there trucks one year.

The whiskey looks good but the bottle is much too full…

Got a link or photo?

Looks like it was brown from day one…

There was a day when those were about seven or eight years old and I could buy them for $100 in much much better condition. I don’t remember what year the 318 got roller lifters but many 318s didn’t make the 100K mark I bought a couple of them for even less. But I was manly after the Bbody cars...

Someone is dreaming $3,500? Looks like it would be a struggle to get $500 for it.

Yeah my drinking glass holds 4oz so I would have trouble remembering what #1 tastes like after #8…, probably after #4… lol

Looks like a great place to start sampling…

There should be no question about replacing the rubber brake hoses. I would replace the one in the rear also. You can’t tell by just looking at hoses because they break down inside and cause the caliper to drag even not release. The part is inexpensive so replace them.

The heck with reading smutty romance novels you need to live one!

Sounds like you have a stuck needle or a plugged valve so you will probably need to pull the top of the carburetor and clean the float assembly with the needle and seat. Don’t be surprised if you find the float bowl full of oxidation.

I used to get to Texas every once in awhile a few years back but I’m still a a Damn Yanky. What has been tempting me lately has been a Long island iced tea, it just sounds so good.