Search results for query: *

Thanks but it’s a little too far for me

Any new information?

OK great! Baltimore is close enough; going right by there Tuesday on the way to Dynamic Converter up in DE

I am looking for a complete V8 FMJ bolt-in front suspension - K frame, T bars, sway bar, LCA, spindles etc within reasonable driving distance from tge Washington DC area. This would be used in my 47 Dodge

I didn’t like the size of the front door when I started planning this build - the proportions just didn’t look “right”. The longer 2 door sedan look fit the wagon much better. That posed some minor problems- the wagon’s B pillars didn’t match the doors so I have to use the 2 door’s B pillars...

I did some further investigating and all 3 terminals are for the key light, which fades out after the door is closed

This is a page from the 82 Mirada shop manual showing the connector for the turn signal. What are the 3 I’ve circled for? Key light maybe. I’m showing wire color code from the bottom yellow with red stripe, black then finally what looks like maybe brown. any help you can provide I’d...

Many Thanks for the lead; i did some backtracking from that picture on FABO and found a wealth of pictures more than sufficient to assemble the mount and install the compressor to the mount. It appears I have everything to do the job. Thanks to everyone!

Thanks for the replies. Here is what the member sent me for the mount: The main bracket with the pulley has these holes Of which 3 of the aluminum bracket holes lines up perfectly with those on the pulley bracket. Of course what i have is nowhere near matching the diagram that was posted...

Wondering if anyone has a shop manual with a diagram of all the bits and pieces to install a Sanden style compressor to a slant. I have all the parts from a 79 Aspen/Volare I bought years ago from another member and need to see how everything goes together. Likely the M/J manuals have the same...

I have a tilt steering column which i believe is from an 80, possibly an 81. I need to replace the multifunction turn signal arm. I don’t have a FSM for info on how to do this. If anyone has one, could you give me a short tutorial on how to remove the arm. Thanks in advance!

Thanks for the info on it - electrical connectors look different than what’s on my harness.

Bringing this ad back from the dead as the day after my last post (mar 26th) I spent 2 weeks in the hospital that resulted in a difficult gall bladder operation! As it also turned out my friend in IA never found a tilt column and ended up moving to MN. So the search is back on - looking...

Thanks for you insight! I “think” my dash harness might be from an 82 as all the colors and location of wires to the ignition components seem match the 82 FSM. I save my FSM AS I had an 82 Miranda a few years back. Another FFMJBodies member sent me the schematic for the ignition components...

Thanks for replying. This is what I have going on : 65 Dart wagon that I was going to use the 65 833 and all associated 4 speed stuff. I already have mocked up a modified J Body underdash harness (forgot from what year) to work with my modified engine harness. The plan was to use a J Body...

Looking for a tilt steering column that will most like be out of an M Body. Steering wheel not needed. I have a J Body floor shift non-tilt column for possible trade.

Thanks! Although the harness I have uses some different colors, I compared your info with that in my 82 FSM and see that my harness will interface with my 80 tilt column. Again, many thanks!

And many thanks for the pics- I understand this is for an 80?

I would guess that the 80 Córdoba would be the same as well

Thanks!

Does anyone have a wiring diagram for an 80 Miranda? I’m specifically looking for the info on the ignition switch, especially the color codes and what wire goes into each terminal. Thanks for any help.

i have a washer bottle, hoses and squirters which I believe came off a 77 or so F Body. I have been l advised on FABO this bottle was correct for late F Bodies and another FABO member said it was the same for M Bodies. The bottle is in great shape with no cracking or damage and the pump still...

As the title says, I'm looking for an 80 or 81 working steering column with tilt and column shift. Must have key(s). Reason an 80 or 81 is needed is to match the underdash wiring harness ignition/turn signal that I'm using. Have a Cordoba/Mirada floor shift column with key for trade.

Two of the wheels have been sold to another member. I have no more available.

I (as the OP) bought all 3 of the wheels my friend had