Search results

  1. Mn mopar

    Nv3500 swap

    And all of this feed back is why i come to this forum, i never even though about a higher stall torque converter but at the same time i have never driven a vehicle with one! Now next question behind a mild built 318 what would be a good stall/ torque converter to look in to?
  2. Mn mopar

    Nv3500 swap

    Greg, yeah i figured i would have to do both just a matter of how much.
  3. Mn mopar

    Nv3500 swap

    I gotta ask why not lol, and the 3 speed is just to sluggish i know i can do diff gears but i do alot of highway driving and i dont want to have the rpm's that high, and i just feel like the j body should have came with a standard trans as an option at least
  4. Mn mopar

    Nv3500 swap

    Right i just want to swap to a 5 speed with minimal modification behind a mild built 318 and from my understanding slight tunnel work and the trans cross member mount move back a bit and a new/ custom drive shaft. If i get a nv3500 out of a dakota or a ram early 90's should bolt up to the la...
  5. Mn mopar

    Nv3500 swap

    Im just curious if any body has put a nv3500 in to a j body? Im throwing the idea around and want to pull the trigger and start getting parts to do it but im not sure on how much modification is needed to make it work. If any body has done this and has pics and maybe a list of things needed...
  6. Mn mopar

    Stroker 360 or proc charged 360?

    Yeah im planning on the stroker kit for sure like you said best bang for buck
  7. Mn mopar

    Stroker 360 or proc charged 360?

    Yeah thats a great idea thanks man
  8. Mn mopar

    Stroker 360 or proc charged 360?

    Alright i did not know that lol ill check them out
  9. Mn mopar

    Stroker 360 or proc charged 360?

    I was thinking of the mr gasket .028 set for gaskets and i already plan on running arp studs
  10. Mn mopar

    Stroker 360 or proc charged 360?

    Can i still deck the block with this set up? And carb or throttle body fuel injection kit?
  11. Mn mopar

    Stroker 360 or proc charged 360?

    Wont the compression be a little high to boost it with it stroked?
  12. Mn mopar

    Stroker 360 or proc charged 360?

    Ok so im starting to get parts together to rebuild a magnum 360 for my mirada and want to hear opinions/ pros and cons of both a stroker kit or a low boost pro charged 360 and swap to carb or a fuel injection system, let me hear what you guys have to say on this subject. Thanks in advance
  13. Mn mopar

    8.25 3.55 sure grip for sale

    What style carrier is it?
  14. Mn mopar

    Soft NOS Extension-WIW/Go For

    You trying to sell the t-top seals?
  15. Mn mopar

    Mirada Rear Bumper Fillers - Have you done it?

    Yes t-top seals need to be made again i need a set, i think im just going to get the one piece rear from vfn this winter and work on it in the spring
  16. Mn mopar

    1980 mirada (project betty)

    The body is actually pretty strait with only surface rust behind rear tires, and a little on the trunk, but the bumper fillers are in rough shape as most are.
  17. Mn mopar

    1980 mirada (project betty)

    Hello all and welcome to my project page, Well for starters it is a 1980 dodge mirada t-top 318 2 barrel 8 1/4 rear end not sure what transmission is in it yet. When i first got the car it had sat out side uncovered for 10+ years had mold/ moss growing on 75% of the car. To start it off i did a...
  18. Mn mopar

    Mirada rear end

    Budw i have a 1980! So your saying if i want to run 2.93 gear set i would need a different carrier correct, and if so what cars would have had the one i should be looking for, i do want to keep the limited slip as well! And yeah i had a buddy rebuild his rear end in high school and did not...
  19. Mn mopar

    Mirada rear end

    I would be but from what budw said i would need a different carrier to run a 2.93 if i read that right
  20. Mn mopar

    Mirada rear end

    Budw, isnt the sure grip already a limited slip? And when i do tires im going with same size already on so no need for a gear change on that, but i do think the 2.93 gears is what im looking for as i will be doing some highway driving, but when i do the gears the rear end is coming out and im...
  21. Mn mopar

    Mirada rear end

    Ok so its been a while but i finally got under the car the other day and i do have a 8.25, 3 questions, #1 2.45 is standard gear ratio for a 8.25 sure grip or something like that? #2 what would be a good ratio to run to wake the car up a bit? #3 any recommendations on where to acquire a new set...
  22. Mn mopar

    Vapor lock, accelerator pump or?

    Yep and lower then the bottom of tank
  23. Mn mopar

    Vapor lock, accelerator pump or?

    So update time, over the weekend i installed my new low pressure electronic fuel pump deleted the mechanical and ran all new fuel line front to back and it solved two big problems i was having with the car #1 it was indeed vapor locking on me fixed that #2 the idle was rough, every now and then...
  24. Mn mopar

    Vapor lock, accelerator pump or?

    I have everything to run new lines but thanks for the link any way
Back
Top