Search results

My rear side glass pieces were leaking, so i pulled them off and cleaned up the area. Turns out they are still leaking. First i tried butyl tape which didnt work very well at all, after cleaning up that i tried Proflex RV sealant and Buytl caulking on the other side. I cut a 2x4 to keep pressure...

Hi Guys, i have a 360 LA engine installed, it was rebuilt by the previous owner...i''ve attached the information card with all the measurements and specs. Currently i was able to determine the following: BRC WG-1161 Camshaft Keith Black 107-040 Pistons I believe the heads are stock, can...

Hi Guys, i have a 1980 Volare with T-tops and i have a set of frame connectors however they appear to only weld to the front and rear sub frame and not the floorpans. Assuming im looking to get 400HP at the crank will these be suitable? They are basically square tubing from front to back, if its...

I treated the inside floor pans with Por-15 with a brush and it worked fairly well, however when it comes to underneath the car i cant imagine brushing is going to get at all the areas. Can anyone recommend a product in a spray can for under the vehicle? I saw that zero rust has some in a can...

Looking for a full floor pan for an 80 Volare aswell as a driver side lower front pillar, basically the point that it joins to the rocker and the floor pan, just below the bottom door hinge mount is rusted through.

Location: Alberta, Canada