FOR SALE 82 Cordoba Part out

[78BlueBaron]

Parting an 82 Cordoba. Everything available as of right now. Bad rails. 318 stuck from sitting. Wheels are complete and very nice with no curb rash or damage.

Located in Rockford IL 61109

 

[HEMI OWNER]

has this car been sold yet

 

[78BlueBaron]

No

 

[78BlueBaron]

Hmm. No body needs anything?

I guess it'll go to the scrap yard sooner than later.

 

[AzDrew]

This guy might need a control arm:
Suspension parts?

 

[Camtron]

@Gorm2297, there’s your part car to get a control arm.

 

[Aspen500]

78, it's been less than 5 days since posting the Cordoba, got to give people time to see it.

 

[78BlueBaron]

I understand. This is probably the slowest of the _Bodiesonly sites I'm on.

 

[Aspen500]

I didn't mean that to sound critical btw

 

[78BlueBaron]

I didn't mean that to sound critical btw

I know. I didn't take it that way either. I just have 13 c bodies and this thing sitting out back now. I just want to try to find cars that need the good stuff this one has left before sending it on its way.

 

[Camtron]

I know. I didn't take it that way either. I just have 13 c bodies and this thing sitting out back now. I just want to try to find cars that need the good stuff this one has left before sending it on its way.

How’s the transmission? I could use a spare to build

 

[j_anderson]

Electronic trunk latch? Looking for the switch and wiring

 

[78BlueBaron]

Electronic trunk latch? Looking for the switch and wiring

All there and tested in good working order. PM me and we will iron out the details.

 

[78BlueBaron]

Wheels sold.
Rocker moldings sold
Rear interior woodgrain window surround moldings sold.

 

[FredMcJoe]

Does this have a factory 8 track AM/FM radio?

 

[78BlueBaron]

Does this have a factory 8 track AM/FM radio?

No, it's an aftermarket head unit with no sign or the original.

 

[FredMcJoe]

No, it's an aftermarket head unit with no sign or the original.

Eventually, I'm going to need the wiring harness for the power windows with relay and door-to-cowl wire loom tubes, the power door lock harness and servo w/brackets too.

Add to that the relay for the power door locks. Also, the interior door handles with rod to the latch. Those need to have the rivets drilled out.

 

[78BlueBaron]

I can pull all of that for you

 

[Old school dodge]

where are you located ?

 

[78BlueBaron]

Windshield IS broken. Wiped off some of the dirt/moss and revealed a nasty rock chip and small spiderweb crack. In addition to the de-lamination in the corners, I would say it's not worth messing with.

Header panel/fender extentions sold.