FMJ parts or deals thread

Status
Not open for further replies.

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
??? used Rear Leaf Springs, Mopar F, M, J Body, Starting bid:US $100.00





http://www.ebay.com/itm/Rear-Leaf-S...are-/251889591961?hash=item3aa5ca2699&vxp=mtr

seller:
Mopar F-body Rear Leaf Springs - fits F, M and J-Body Mopars, the cars with the Transverse Torsion Bar Front Suspension.

This item came from a 1978 Dodge Aspen with only 80K miles of usage so they're in very good condition.

The front and rear spring hangers are also already attached.

I don't think the aftermarket makes rear leaf springs for the F-Body Mopars.

It's a very big and dangerous job to remove these from a car at a junkyard and you have to bring a boatload of heavy tools with you to do such a job.

This item is already off the car and ready to go. You can skip all that back-breaking, grungy work.

That's assuming you can still find one of these cars in a junkyard.

{{I THINK US STEEL SELLS THESE AS 5 LEAF SPRINGS FOR $130 PLUS SHIPPING}}}}}
 
Last edited:

72Dodge

Well-Known Member
Joined
Feb 14, 2012
Messages
536
Reaction score
36
Location
Milwaukee, WI
remote side mirror I CANNOT FOR THE LIFE OF ME REMEMBER WHO WAS THE MIRADA GUY THAT NEEDED ONE OF THESE


Current bid:

US $7.00

http://www.ebay.com/itm/1978-Plymou...r_Truck_Parts_Accessories&hash=item2c98817f08

You may not be talking about me, but I'm a Mirada guy who needs one, but I need a Mirada one, which is completely different than this. Funny though that I never even thought of trolling eBay for one. I've decided if I don't get one, I'm installing a tiny camera there streaming video to the in-car Android-powered screen like they do on some of the new cars, so I'm covered either way :)
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
440 Dodge parts (davie florida) http://miami.craigslist.org/brw/ptd/4841880408.html

5901 SW 43 St.

Forged steel crank for Chrysler/Dodge/Plymouth 413/426/440 engines. 6 bolt flywheel flange. 3.750" stroke. OEM crank, not chinese! Fresh regrind at .010/.010 on the split (middle of tolerance). Oil holes are chamfered.
Price $350.00.

Scat H-Beam 6.760" connecting rods with bushed pin ends for .990 pins. New, in unopened plastic wrappers.
Part #2-440-6760-2374-990. Price $400.00

New Milodon louvered windage tray for stroker engines. Part #32005. Already clearanced for ARP rear main studs. New in original box. Price $50.00

Set of stock connecting rods, #1851535, with stock rod bolts and used TRW forged flattop pistons (some have scoring on skirts). Make offer

NEW Clevite Performance hydraulic camshaft #229-2313 for RB (big block) Chrysler engines. This cam is pictured below in the box. It has assembly lube on the lobes, that's why the cam and box appears dirty, but it is new.
Intake Valve Lift .480, Duration @ .050"- 236*
Exhaust Valve Lift .480, Duration @ .050"- 236*
Lobe Separation -108
Price $75.00 for cam only, new lifters available, call for price.

Slightly used Clevite Performance hydraulic camshaft #229-2034 for RB (big block) Chrysler engines (installed it in a car, and performed the break-in procedure, but the customer didn't like the slightly rough idle, and wanted it changed to a STOCK cam. So we did. He never drove it with this cam.) This cam is in perfect shape, and comes with the matched lifters, which are clean and stored in a box in the order that they were in the engine, for proper re-installation.
Intake Valve Lift .465, Duration @ .050" - 224*
Exhaust Valve Lift .488, Duration @ .050" - 234*
Lobe Separation -112
Price $100.00 for cam & lifters.

2 sets of cylinder heads:
2843906 castings, date codes are 08158/08088. 79.5cc chambers, 2.08/1.74 valves. 3769975 castings (74-75, 400&440). 83.1cc chambers, 2.08/1.74 valves.

Oil pan & timing chain cover, glass bead cleaned and painted Mopar orange. Double roller timing chain set. Stock windage tray, Melling oil pump, pickup screen, intermediate shaft. Crank pulley, damper bolt, front oil seal shield.
Redline Automotive Competition Engines, M-F, 11-6,

Full in-house machine shop service
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
MOPAR Slant Six 9 1/4 Clutch 23-Spline Pressure Plate & Disc Dodge Plymouth A833 US $18.75 Shipping: $18.50

http://www.ebay.com/itm/MOPAR-Slant...833-/261838818458?hash=item3cf6cf4c9a&vxp=mtr

A good used 9 1/4 inch pressure plate & 23 spline clutch disc out of a 1968 Dodge Dart with a Slant Six.
It looks like the clutch was replaced right before the car was parted-out.
The pressure plate surface is smooth and the levers are not worn.
A great way to keep that old Dart or Valiant going at a low cost.
Sold As Is with No Returns & shipped Flat Rate to any lower 48 USA location.
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
Mopar 318 340 360 383 400 440 Engine Parts Lot US $0.99 Shipping: $24.99

http://www.ebay.com/itm/Mopar-318-3...e-Parts-Lot-/161663523432?hash=item25a3e59a68








This auction is for a lot off new used parts for Mopar 318 340 360 383 400 and 440 Engines, There is a complete set of push rods and lifters for a 318 340, set of bearings for a 383 440,

two 383 400 440 timing chains ( one with out gears), one 318 340 360 timing chain, and a 383 440 Purple Cam complete with lifters has some surface rust on polished surfaces. Good nw used parts. please contact for more info, pictures and add a dot com to my store name for more parts. Thanks
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
MOPAR 440 DISTRIBUTOR & IGNITION PARTS LOT Ends in: Time left: 7 hours Current bid:US $41.00

YOU ARE BIDDING ON A MOPAR 440 DISTRIBUTOR & IGNITION PARTS LOTBELIEVED TO FIT MANY YEARS & MODELS OF: DODGE, PLYMOUTH, CHRYSLER, IMPERIAL, RAM

THE WINNING BIDDER WILL RECEIVE EVERYTHING IN THE PHOTOS:

1- USED MOPAR ELECTRONIC DISTRIBUTOR, PART NUMBER 3755157. THE SHAFT IS STRAIGHT AND IT TURNS SMOOTHLY. THERE IS NO EXCESSIVE WEAR AND NO VISIBLE DAMAGE. COMES WITH AN AFTERMARKET CAP & ROTOR.

1- USED MOPAR ELECTRONIC IGNITION MODULE

1- USED MOPAR BALLAST RESISTOR

1- USED MOPAR ELECTRONIC IGNITION WIRING HARNESS. IT HAS ONE CUT-OFF TERMINAL. I DO NOT KNOW WHERE THE (BLUE) CUT-OFF LEAD WOULD GO TO. PLEASE SEE ALL PHOTOTS.

SHIPPING WEIGHT IS 4.11 POUNDS

SALES AND SHIPPING WITHIN THE UNITED STATES ONLY.

PAYMENT, VIA PAYPAL ONLY, IS DUE WITHIN 3 CALENDAR DAYS FROM THE END OF THE AUCTION.

PACKAGE WILL BE SHIPPED VIA USPS.

http://www.ebay.com/itm/MOPAR-440-D...Parts_Accessories&hash=item234cf4e8f6&vxp=mtr
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
New Fiberglass Rear Bumper 76-79 Dodge Aspen Plymouth Volare Mopar - $175 (Gem County)

http://boise.craigslist.org/pts/4961993691.html

New fiberglass rear bumper for Dodge Aspen and Plymouth Volare's..Also fits 78-79 Duster 76-79 Road Runner 76-79 Aspen R/T..Wagon, 2dr coupe and 4dr sedan.

Call(No Texts)for more info..$175
preferred contact method:
phone
contact by phone:
☎ (WHATEVER BOISE, IDAHO AREA CODE IS ->) -965-0664
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
OLDER CHRYSLER SHEET METAL - $125 (saint clair shores) http://detroit.craigslist.org/mcb/pts/4949533426.html

preferred contact method:
phone
contact by phone:
☎ 1(586)436-2830

I HAVE SOME OLDER CHRYSLER, PLYMOUTH & DODGE N.O.S SHEET METAL!!!

* THE 1ST IS A RIGHT REAR 1/4 PANEL FOR AN ASPEN/VOLARE 1976 TO 1980 ?. IT FITS A 4 DOOR (NOT A 2 DOOR). THE PRICE IS $150.00

* THE 2ND LOOKS TO BE A CORE SUPPORT FOR A 1978-80 SMALL DODGE/PLYMOUTH PICKUP OR OMNI/HORIZON. THE PRICE IS $125.00.

* THE 3RD IS A DOOR PATCH PANEL FOR 1976-1989 ? NEWPORT OR NEW YORKER. $125.00

* ALL THESE PARTS ARE N.O.S. STILL IN FACTORY PRIMER. 1 IS STILL WRAPPED

* THESE ARE ALL THE PARTS I HAVE. I HAVE NOTHING ELSE!!!
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
1978 Plymouth Wagon - $800 (Hillsboro) http://portland.craigslist.org/wsc/cto/4965429383.html

1978 Plymouth Volare wagon, 318, automatic, new power break booster, new radiator, replaced all brake lines and more. MSD Ignition system.

Great restoration project.

Runs and drives but tags are not current. Clear title in hand.

$800 OBO - Cash - Too many projects

preferred contact method:
email
phone
contact by phone:
☎ 503-430-1040
reply by email:
zbbn7-4965429383@sale.craigslist.org
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
Mopar High Back Bucket Seats..Need recovered or Covers. - $125 (Emmett) http://boise.craigslist.org/pts/4950157175.html

Bucket seats w/tracks from late 70's Mopars..in need of recovering,but very solid frame/foam otherwise. The set I have are red but otherwise the same as pictured.

$125..Call 208-9six5-zero6six4(No Texts)for more info or to see.

Keywords: Dodge Plymouth Chrysler Ram Truck Duster Volare Aspen Racer Ratrod

preferred contact method:
phone
contact by phone:
☎ 208-965-0664
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
Chrysler/Dodge/Plymouth Headers - $100 (Wixom) http://detroit.craigslist.org/okl/pts/4940121854.html


I have a set of headers I bought 25 years a go. They are Cyclone brand. And I bought them for a 77 Volare' with a 318 (5.2L) engine. They were never installed. I wouldnt know what else they would fit but I'm sure they are universal for most 318 V8's of that era. The are in Good condition. They have been sitting in my attic for all of that time. I'm asking $100 or best offer. Email me if you're interested

preferred contact method:
email
reply by email:
fbqmp-4940121854@sale.craigslist.org
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
MOPAR BROCHURES : EXCELLENT CONDITION

http://chicago.craigslist.org/sox/clt/4964552260.html

preferred contact method:
email
reply by email:
zhvqw-4964552260@sale.craigslist.org

CHARGER,VOLARE,DART,
OMNI,COLT,TURISMO
DAYTONA
2.2
SHELBY
RAMPAGE
FURY ,CORDOBA,TRAIL DUSTER,RAMCHARGER,MAGNUM,TURBO......MORE

$4- $8 each depending on brochure

hemi 440 340 six pack 426 383 440 318 360 car show car plymouth chrysler glh glhs road runner aspen station wagon 4x4 four wheel drive car show swap meet flea market estate sale csxt 2.2 turbo power wagon d100 d200 dodge truck
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
1976 plymouth volare road runner - $800 (hazel green,al) http://atlanta.craigslist.org/nat/cto/4939523061.html

plymouth roadrunner PROJECT NO ENGINE OR TRANS was going to build for drag racing but due to health problems can not. body good. interior white w/ buckets, console, floor shifter. left 1/4 glass needs replaced. some parts in trunk. needs bumper brackets & grill parts 256-828-7159

$800 / BEST OFFER
preferred contact method:email
phone
contact name: brian
contact by phone: ☎ 256-828-7159
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
1977 Plymouth Volare wagon - $3250 (Cincinnati) http://cincinnati.craigslist.org/cto/4950847229.html

Original 19000 mile volare wagon. Super six engine with power disc brakes, a/c, power steering and
am/fm radio. this wagon is a completely unmolested survivor with original paint and interior. Runs well and needs very little to be ready for car show season! has new brake lines and hoses, rebuilt wiper linkage ans some spare parts. keywords, mopar dodge charger challenger fury road runner
family truckster.

preferred contact method:email
phone
text
contact name: ken
contact by phone: ☎ 513 378 0442
reply by email: pvmpq-4950847229@sale.craigslist.org
 
Status
Not open for further replies.
Back
Top