FMJ parts or deals thread

Status
Not open for further replies.

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
383 426 440 mopar bellhousings + flywheel - $1 (oberlin) http://cleveland.craigslist.org/pts/4832223508.html


383 426 440 mopar bellhousings + flywheel

castings 2468372 and 2406293 (one is for an original borg warner trans from a 63 dodge plymouth )

bell $75 - $375

flywheel $100 - $135

also have a 10.5 inch hemi and 440 flywheels for $135

68-69 roadrunner 4 speed shifter setup

clutch forks, crossmember , 4 speed tailstock among other parts

preferred contact method:
email
text
contact name:
jeff
contact by phone:
☎ 4402256134
reply by email:
czhzb-4832223508@sale.craigslist.org
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
Dodge - Mopar 440 Engine & Dana 60 rear end - $450 (Lorain, OH)

300 OBO - 440 longblock -- casting date 9-20-74, casting number 4006630. Engine has a cast crank and 346 heads. Needs to be rebuilt. . ..sold as a core. Good block to build up, read more about it here {Jim Laroy [IQ52 of FABO] told me that these are high potential big block heads}

150 OBO - Dana 60 housing -- Great foundation to build a custom rear end out of. The numbers on the case read 603943 and I found this description on the internet: 1980-81 F-250 3/4 TON 4X2, 4X4 PICK-UP - SEMI FLOAT. Does not have axles or backing plates, just the rear end housing, the gears (crusty), and the cover.

Everything is OBO and I am interested in equal/up/down trades for:
- GEN 3 Hemi (5.7, 6.1, 6.4) parts such as blocks, heads, intake manifolds, etc.
- Ebody parts such as jack assembly, air cleaners, valve covers or possibly other parts
- Old antiques, something that can be restored - peddle car, slot machine, etc.




preferred contact method:
email
reply by email:
p3mjx-4806774347@sale.craigslist.org
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
mopar B-body parts - $100 (Mentor) http://cleveland.craigslist.org/pts/4823427593.html




I have for sale various b- body parts from my old 73 roadrunner. these will fit other b bodys

distributor - fit 318
wiper motor
wiper motor switch
axle seals
ignition resistor
flywheel dampener fits318
vacuum operated trunk latch
hood turn signals
foot operated bright switch
some left over A 833 tranny parts from rebuild
Mallory ignition module #605 used

$100.00 Cash only obo. Call Mike 440-317-1659
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
78 chrysler/mopar 440 engine - $450 (massillon) http://akroncanton.craigslist.org/pts/4811968869.html

i have a 1978 Chrysler 440 big block motor.
It will need a rebuild i have everything for it except the carb.
It had 92000 miles on it when it was pulled did run when pulled carb has been pulled off since motor is still assembled.
these blocks alone can sell for what im selling the whole motor for i just dont need it right now.
Can send more pictures text or email

preferred contact method:
email
text
contact by phone:
☎ 3304180215
reply by email:
npcmd-4811968869@sale.craigslist.org
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
mopar parts engine parts blocks heads cranks ect 318 340 360 383 440 - $1 (akron) http://akroncanton.craigslist.org/pts/4848179778.html

i have a collection of mopar parts that i am liquidating
please inquire
i have mostly small block stuff including 318 340 and 360 blocks cranks ect
also have some big block stuff 383 motor
other big block heads cranks ect
please call me only 3303386897

preferred contact method:
phone
text
contact by phone:
☎ 3303386897
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
MOPAR 440 with 721 - $850 (Sullivan) http://cleveland.craigslist.org/pts/4821172066.html

MOPAR !!!! 440 with 727 --can hear run--in 1978 motorhome --low miles--buy whole 1000 or just motor and tranz 850---please call 440 647 3865---motor home in rough shape , water damage . only used for local partys--got newer one---Thanks Tim

preferred contact method:
email
phone
contact name:
Tim Kidney
contact by phone:
☎ 440 647 3865
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
426 Hemi Mopar Parts Engine Blocks More - $7500 (South Texas? -near rio bravo, near Texas, Mexico border- north of Doffing, West of Alton Texas, off of Doffing Road, East of Edinburg

http://miami.craigslist.org/mdc/pts/4863678932.html

I have for sale a complete 1967 426 Hemi engine. It is still a standard bore engine and is apart. I also have several blocks for sale and lots of miscellaneous pieces. These are hard to come by and we have lots of Mopar parts on hand. Call me at 9563524707 to purchase.

preferred contact method:
email
phone
text
contact name:
Jessica
contact by phone:
☎ 9563524707
reply by email:
fdqzz-4863678932@sale.craigslist.org

http://images.craigslist.org/01111_cnGkcXVUSil_600x450.jpg

http://images.craigslist.org/01111_cnGkcXVUSil_600x450.jpg

if you get this treasure looking at my repost, i would like a thank you
 
Last edited:

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
Mopar Small Blocks (sw bakersfield) http://bakersfield.craigslist.org/cto/4809965916.html

For sale are 2 Mopar engines... 360 stroker and 340.
The 360 comes with Scat crank, rods, pistons, Edelbrock duel plane intake, J heads (Big Valves) ect...
Block has been machined along with the heads... Many extra parts... Ready to build!!
I have a 747 tranny that will go with it.
Everything for $3000

360 Stroker... Ready to build... Machined work done on block and heads. Scat crank with all internals... You can't build one for this!!!
http://fresno.craigslist.org/pts/4851184398.html
Also... a 340 block with x-tra parts.

Please call Paul at six six one-3zero3-8715.

Please call 66one-3zero3-87one5.

preferred contact method:email
phone
text
contact name: Paul
contact by phone: ☎ 661-303-8715
reply by email: 7m5sf-4809965916@sale.craigslist.org
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
Mopar Rally Wheels - $325 (Dawsonville) http://atlanta.craigslist.org/nat/pts/4859910484.html

Set of 14" rally wheels that are in excellent shape. They have the large bolt pattern (5-4 1/2"). The center caps are not included, just the wheels, trim rings, and tires. Three of the tires are in nice shape with some tread left and the other is getting bald.

$325 OBO

Call or text 678-410-2132


preferred contact method:email
reply by email: md4dw-4859910484@sale.craigslist.org
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
I have two big block 727 cores, one from a 1974 C-body cop car if anyone wants them. I could use a few bucks.

I also have a small block 904 rebuilt, from a 1974 plymouth satellite.

If anyone needs the tailight bezels for volare aspen's that look like the 76-77 volare tailights, but connect together with a tail panel, i have those as well. Make an offer on any of these items. +shipping
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
Offenhauser Slant 6 Dual 1bbl Carb Intake and Carbs http://www.forabodiesonly.com/mopar/showthread.php?t=300638

http://www.forabodiesonly.com/mopar/showthread.php?t=300638

Picked this up a while back, ran it on the car a couple times, just wasn't for me and what I want outta the car, little too much for a stock slant. All parts where new when I got them, has a complete linkage kit and 2 into 1 choke cable, and air cleaners. All you would need to do is plumb your own fuel system and install/tune. The carbs are brand new, not rebuilt or re man, Daytona 1100's which are built to be ethanol resistant and be friendly with modern crap gas. I am located in Rocky Point Washington, and can ship.

Asking $700


Ken_B of forabodiesonly.com/mopar
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
commercial listing with allot of parts (old & new): axles, etc.
Seller Phone Number: 845.742.0571

http://www.racingjunk.com/Driveline/182384008/MOPAR-DANA-60-8-3-4-S-A833-4-SPEEDS-am.html

WWW.ELITEVINTAGEAUTO.COM

REAR AXLE ASSEMBLIES AND PARTS

all rears end assy powder coated and detailed!!

8 3/4 AND DANA 60 REAR DISC BRAKE PACKAGE, WITH PARKING BRAKE AND DRILLED/SLOTTED/VENTED ROTORS, COMPLETE KIT WITH HARDWARE, $549

A-BODY 8 3/4 HOUSINGS- COMPLETELY REDONE, FROM STOCK TO CUSTOM WIDTH, BUILT TO YOUR SPECS WITH NEW BILLET ENDS AND AXLE SEALS, POWDER COATED AND READY TO INSTALL, $599

BACK BRACING ADD $249

64-76 A-BODY 8 3/4'S COMPLETE ASSYS, WITH CHOICE OF RATIOS, SURE GRIP IN A 489 CASE CENTER- DISC BRAKES/SLOTTED AND DRILLED ROTORS WITH 3" STUDS ALL NEW AXLES, BEARINGS, GEARS, SEALS, BRAKES, AND WAY MORE- $2199- INCLUDES 1 YR WARRANTY ON PARTS AND MATERIALS

E- BODY DANA 60 WITH 3.54 GEARS, DISC BRAKES OR DRUMS- ALL NEW BRAKE PARTS, DISC BRAKES/SLOTTED AND DRILLED ROTORS WITH 3" STUDS , ALL NEW GEARS, TRACK LOCK POSI, MOSER AXLES, GREEN BEARINGS, NEW BRAKE LINES, FORGED U BOLT 7290 YOKE, $2299

B-BODY 66-70 DANA 60 WITH 4.10 GEARS,DISC BRAKES OR DRUMS- ALL NEW BRAKE PARTS,DISC BRAKES/SLOTTED AND DRILLED ROTORS WITH 3" STUDS , ALL NEW GEARS, TRACK LOCK POSI, MOSER AXLES, GREEN BEARINGS, NEW BRAKE LINES, FORGED U BOLT 7290 YOKE, $2299

A- BODY DANA 60, STOCK DIMENSIONS, W/ 3.54 GEARS,DISC BRAKES OR DRUMS- ALL NEW BRAKE PARTS, DISC BRAKES/SLOTTED AND DRILLED ROTORS WITH 3" STUDS , ALL NEW GEARS, TRACK LOCK POSI, MOSER AXLES, GREEN BEARINGS, NEW BRAKE LINES, FORGED U BOLT 7290 YOKE, $2299


*****NICE USED DANA 60 POSI UNITS AND GEARS****** 30 SPLINE AND 23 SPLINE POSI UNITS, $225 AND UP, NICE USED GEARS, CLEANED AND PACKED, READY TO SHIP, $75/SET 3.54/3.73/4.10/4.56/4.88 CALL......

NICE REBUILT 489 CASE 3.55/3.73/3.91/4.10 AND UP RATIO SURE GRIP CENTER SECTION IN AS NEW CONDITION- HAS BEEN COMPLETELY DISASSEMBLED, DEGREASED, INSPECTED,NEW GEARS, NEW AUBURN PRO POSI, NEW BEARINGS/SEAL /CRUSH COLLAR ELIMINATOR INSTALLED AND PINION TORQUED TO SPEC, BACK LASH SET, AND PINION NUT LOCK-TIGHTED AND STAKED IN PLACE- $1299 U
BOLT STYLE YOKES STARTING AT 99.00-UP

4 SPEED PARTS

MOPAR 4 SPEED TRANSMISSIONS AND PARTS
66-72 HEMI 4-SPD TRANSMISSIONS FOR ALL STYLE B AND E BODY CARS $1995 AND UP AND WE ALSO BUILD A-BODY HEMI 4-SPDS CUSTOM BUILT FROM 1995-UP AS AVAILABLE

66-74 23 SPLINE 4-SPD TRANSMISSIONS FOR A/B/E CARS- REBUILT W/ 1 YR WARRANTY ON PARTS AND MATERIALS, $1195-UP

67-9 BIG BLOCK A BODY BELLHOUSING, # 372, 10.5" CLEANED BLASTED AND PAINTED, $399

69-71 SMALL BLOCK BELLHOUSING, #482, RECONDITIONED, $249

72-73 SMALL BLOCK BELLHOUSINGS, #734, RECONDITIONED, $249

70-74 BIG BLOCK ALUMINUM BELLHOUSINGS, RECONDITIONED ORIGINALS, #513 $429

74-80 SMALL BLOCK 10.5" OD BELLHOUSING, WITH 5.125" PILOT, #859, $299

COVER , 10.5 & 11" BIG BLOCK BELL, $105

FORK, FOR BIG BLOCK BELL, B/E, AND BIG BLOCK A BODY, 10 7/8" LONG, $89

Z BARS FROM $ 79.00 RESTORED

10.5" FLYWHEELS, NEUTRAL BALANCE, GOOD USED, $155 NEW $289 70-73 440HP AND 6 PK EXT BALANCE, ORIGINAL $299

11" BIG BLOCK FLYWHEELS, USED $155, NEW DUAL PATTERN MCLEOD FOR 10.5/11" CLUTCHES, $299

REBUILT 6353 HURST SHIFTER MECHANISMS,FOR 68-76 A BODY AND 68-70 B BODY, $189 NO CORE

REBUILT 7180 70-4 E BODY 71-4B BODY SHIFTER MECHANISMS, $229 NO CORE

62-65 B BODY 4 SPEED PEDAL ASSEMBLIES, RESTORED WITH NEW BEARINGS AND BUSHINGS, ASSYS ARE BLASTED AND PAINTED AS PER FACTORY SPECS, $399

66-70B 4 SPEED PEDAL ASSEMBLIES, RESTORED WITH NEW BEARINGS AND BUSHINGS, ASSYS ARE BLASTED AND PAINTED AS PER FACTORY SPECS, $399

67-76 A BODY 4 SPEED PEDAL ASSEMBLIES, RESTORED WITH NEW BEARINGS AND BUSHINGS, ASSYS ARE BLASTED AND PAINTED AS PER FACTORY SPECS, $299

70-74 E BODY 4 SPEED PEDAL ASSEMBLIES, RESTORED WITH NEW BEARINGS AND BUSHINGS, ASSYS ARE BLASTED AND PAINTED AS PER FACTORY SPECS, $399


68-69 B BODY CONSOLE 4-SPD SHIFTER ASSY W/ RODS, NICE CHROME VERY HARD TO FIND HURST CONSOLE MODEL, HANDLE/ MECHANISM/ RODS W/ TABS $450

68-9 B BODY NON CONSOLE BENCH SEAT 4-SPD SHIFTER, NICE CHROME VERY HARD TO FIND HURST ORIGINAL, HANDLE/ MECHANISM / RODS W/ TABS, $450

69-73 A BODY NON CONSOLE SHIFTER ASSY, NICE CHROME, HANDLE AND MECHANISM, $289



A BODY PARTS MORE TO BE ADDED SOON!!

NEW! 8 3/4 BIG BOLT PATTERN AXLES, WITH GREEN BEARINGS AND WHEEL STUDS INSTALLED, $450/PR

8 3/4 AND DANA 60 REAR DISC BRAKE PACKAGE, WITH PARKING BRAKE AND DRILLED/SLOTTED/VENTED ROTORS, COMPLETE KIT WITH HARDWARE, $549

FRONT DISC BRAKE PACKAGE- NEW DROP FORGED SPINDLES, DRILLED/SLOTTED/VENTED ROTORS, CALIPERS AND ADAPTER BRACKETS, HOSES, BEARINGS, SEALS AND HARDWARE, $699

ADD POWER BRAKE BOOSTER AND MASTER, $299

ADD DRUM/DISC OR DISC/DISC PROPORTIONING VALVE, $99
8 3/4 SMALL BOLT REAR AXLES, $195/PR

10X1.75" BELL TYPE REAR BRAKE DRUMS, SMALL BOLT PATTERN,GOOD USED, $75/1

10X1.75" REAR DRUM BRAKE BACKING PLATES, SMALL BOLT PATTERN , BLASTED AND PAINTED BLACK, $145/PR

67-9 CONVERTIBLE INTERIOR WINDSHIELD GARNISH TRIM, 3 PCS, SET

67-9 BARRACUDA COUPE OR CONVERTIBLE REAR DECK LID, SOLID PIECE, HAS BEEN SODA BLASTED, $395

68-70 340 HP EXHAUST MANIFOLDS, NICE CONDITION, $595/PR

69 BARRACUDA REAR TAIL PANEL, FAIR CONDITION, $235

71-2 GULL WING SPOILER, NEW IN BOX FROM FIRST PLACE, $349

72 DART/DEMON FENDERS, CLEAN BUT HAVE SOME DENTS, $350/PR



B BODY PARTS MORE TO BE ADDED SOON!!

8 3/4 AND DANA 60 REAR DISC BRAKE PACKAGE, WITH PARKING BRAKE AND DRILLED/SLOTTED/VENTED ROTORS, COMPLETE KIT WITH HARDWARE, $549

FRONT DISC BRAKE PACKAGE- NEW DROP FORGED SPINDLES, DRILLED/SLOTTED/VENTED ROTORS, CALIPERS AND ADAPTER BRACKETS, HOSES, BEARINGS, SEALS AND HARDWARE, $699

ADD POWER BRAKE BOOSTER AND MASTER, $299

ADD DRUM/DISC OR DISC/DISC PROPORTIONING VALVE, $99

63-5 MANUAL STEERING COLUMN, FLOOR SHIFT, $275

65 CORONET TAIL LENSE ASSY, RH SIDE, NOS $195

66-7 DANA 60 23 SPLINE POWER LOCK SURE GRIP UNIT, GOOD CONDITION, $499

66-7 DANA 60 23 SPLINE AXLES, GOOD CONDITION, ORIGINAL, COMPLETE, $499

66-7 DANA 60 HOUSING, STOCK WIDTH ( 54 1/4" FROM END TO END) , HAS BEEN CLEANED, BLASTED, AND POWDER COATED BLACK, NEW AXLE SEALS, $1200

66-8 11" REAR BRAKE DRUMS, SMOOTH TYPE, GOOD CONDITION WITH DECENT AMOUNT OF METAL LEFT, $100/PR

66-69 383/440 426 HEMI TORQUE DRIVE FAN ASSY, ORIGINAL, #215 FAN AND 676 CLUTCH, VERY NICE, $375

66-69 V8 K FRAME, GOOD CONDITION, $200

66-8 DUAL SNORKEL AIR CLEANER, NO BASE, ROUND SNORKELS, $185

66-70B CONVERTIBLE STAINLESS WINDSHIELD TRIM, NICE, TOP 2 PIECES, $150/PR VERTICAL 2 PIECES, $150/PR, INTERIOR BLACK STEEL 3 PC SET, $175

66-70B CONVERTIBLE REAR BOOT STRIP, $195 CONVERTIBLE SEAT BOX (SHEETMETAL) $175

66-70B CONVERTIBLE REAR INTERIOR PANELS, NEED SOME WORK BUT NOT BAD, $325/PR

66-72 383 TORSION BARS, 778 AND 779, $125/PR

67-9 B BODY FLOOR SHIFT STEERING COLUMN FOR 4 SPEED OR AUTO, MANUAL OR POWER, 3 AVAIL, $349

68-9 383/440 HP EXHAUST MANIFOLDS, NICE NO DAMAGE, BLASTED AND PAINTED, LOOKS GREAT, $450/PR

68-9 RALLYE DASH WIRE HARNESS, NICE CONDITION, 2) AVAILABLE, $225/1

68-9 CHARGER HDLT DOORS, GOOD CONDITION, $95/1

68-9 CORONET POWERBULGE HOOD, SOLID BUT HAS LITE DENTS, $890

68-9 CORONET FRONT PARK LAMPS, NICE, $99/PR

68-70 B BODY REAR WINDOW TRIM, EXC. CHARGER, GOOD CONDITION, $145



69 RAM CHARGER / AIR GRABBER HOOD OVAL 440 BASE PLATE, SLIGHTLY MODIFIED, LOOKS AND WORKS GOOD, $450

69 "053" 22" RADIATOR, GOOD CORE, $385

69-UP BIG BLOCK POWER STEERING PUMP, BRACKETS, AND PULLEY, COMPLETE ASSY, SAGINAW TYPE, $155 OR WITH TRACK PACK/SUPER TRACK PACK COOLER ASSY $375

70-1 383 440 HP EXHAUST MANIFOLDS FOR B/E BODY NICE, $595/PR

70 RALLYE DASH WIRE HARNESS, NICE CONDITION, 2) AVAILABLE- 1) WITH AC AND POWER WINDOWS, $325 AND THE OTHER IS STANDARD RALLYE, $295

COMPLETE 70 RALLYE DASH FROM 70 SUPERBEE, CHARGER, GTX, ALL WOODGRAIN AND PLASTIC, FOR 4 SPD, INCLUDES GAUGES, TRIM, HARNESS (NICE),4 SPD LIGHT & HARNESS, AND IT IS ***COMPLETE***GREAT TO CONVERT OR REPLACE MISSING DASH ASSY, ASKING $1499


70 CHARGER/SUPERBEE WOODGRAIN RALLYE DASH ASSY, GOOD CONDITION, $345

70 B BODY RALLYE DASH BURNT ORANGE GLOVE BOX DOOR, NICE, $95

70 CHARGER SUPERBEE WOODGRAIN RADIO BEZEL, $75

70 CHARGER/ SUPERBEE WOODGRAIN ABOVE GLOVEBOX, GOOD SHAPE, $75

70 RALLYE DASH ASHTRAY ASSY, BURNT ORANGE, $65 INCL RECEIVER

70 RALLYE DASH LH LOWER DASH PLASTIC, BURNT ORANGE, $55

70 RALLYE DASH RH LOWER DASH PLASTIC, HAS SMALL CHIP, FOR AUTO AND NON AIRGRABBER, $55

70 SUPER BEE RAMCHARGER DUCTWORK, ORIGINAL AND RESTORED, BEAUTIFUL CONDITION, WITH NOS DASH CABLE AND USED CROSSOVER CABLE AND GOOD USED SEAL, $1100

70 ROADRUNNER GRILLE AND LOWER GRILLE, NICE $300

70B STEERING COLUMN FOR FLOOR SHIFT, RESTORED PROFESSIONALLY, $750

71-2 FLOOR SHIFT STEERING COLUMN FOR POWER STRG, USED /NO KEY, $245

71-2 GULL WING SPOILER, NEW IN BOX FROM FIRST PLACE, $349


E BODY PARTS

FRONT DISC BRAKE PACKAGE- NEW DROP FORGED SPINDLES, DRILLED/SLOTTED/VENTED ROTORS, CALIPERS AND ADAPTER BRACKETS, HOSES, BEARINGS, SEALS AND HARDWARE, $699

ADD POWER BRAKE BOOSTER AND MASTER, $299

ADD DRUM/DISC OR DISC/DISC PROPORTIONING VALVE, $99

8 3/4 AND DANA 60 REAR DISC BRAKE PACKAGE, WITH PARKING BRAKE AND DRILLED/SLOTTED/VENTED ROTORS, COMPLETE KIT WITH HARDWARE, $549

V8 K FRAME, GOOD CONDITION, $200

340-383 TORSION BARS, 778/779, $125/PR

70 FLOOR SHIFT STEERING COLUMN, $285 BOTH POWER AND MANUAL AVAIL

70E 4 SPEED SHIFTER ASSY, 7180, SLIP IN TYPE, REBUILT, $239 NO CORE

70E PISTOLGRIP HANDLE ASSY, NEEDS RESTORATION, $150

70-4 E BODY 4 SPEED PEDALS, RESTORED TO LOOK AS NEW, $399

70-4 "340 FOUR BARREL" HOOD EMBLEMS, ORIGINALS, $40/PR

71-UP 4 SPD SHIFTER ASSY, BOLT ON TYPE, REBUILT, NO CORE, $239

71 CHALLENGER GRILLE ASSY, NEEDS MINOR REPAIR BUT GOOD OVERALL, $675

71 CHALLENGER UNDER DECK LID BRACKETS, NEW FROM FIRST PLACE REPRODUCTIONS, WITH ALL HARDWARE, $75
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
INTAKES AND PARTS

340/440 6 PK OVAL AIR CLEANER ASSY, ORIGINAL FOR NON FRESH AIR, $395

73 340 AIR CLEANER ASSY, NICE, $145

69 AIRGRABBER/ RAMCHARGER BASE ASSY FOR 440, STARTED LIFE AS A 383 BUT WAS CUT DOWN, $310

MOROSO POLISHED ALUMINUM VELOCITY STACKS, VINTAGE, WITH AIR FILTERS AND LIDS FOR THE STREET, $120/SET

HOLLEY 440 STREET DOMINATOR, NICE CONDITION, $185

WEIAND 440 6 PACK TUNNEL RAM INTAKE, NOS BUT HAS BEEN POLISHED, $1750

EDELBROCK 340-360 TUNNEL RAM WITH 2X 450 HOLLEYS, GOOD CONDITION, $650

EDELBROCK 340-360 PERFORMER RPM INTAKE, NEARLY NEW, $190

EDELBROCK 340 TORKER, NICE, $145

EDELBROCK 340 VICTOR, $175

HOLLEY 4382 AND 4383 MECHANICAL RACE 6 PACK CARBS AND PROGRESSIVE LINKAGE, $950

HOLLEY 650 DOUBLE PUMPER, GOOD CONDITION $245

HOLLEY 700 DOUBLE PUMPER, GOOD CONDITION $245

HOLLEY 750 DOUBLE PUMPER, REBUILT W/ LINE, $289

HOLLEY 750 VAC SEC, GOOD USED, $175

EDELBROCK 600 WITH ELEC CHOKE, $145

VALVE COVERS

INDY POLISHED 440 WEDGE VALVE COVERS, WITH "INDY CYLINDER HEAD" CAST IN, $190

M/T 440/383 BLACK COVERS WITH VERTICAL VINTAGE TYPE BREATHERS, $145

440 SHEETMETAL VALVE COVERS, NEW, $145

HOLLEY 340-360 VINTAGE FINNED VALVE COVERS, NATURAL FINISH, $135

WHEELS

WELD DRAGLITES, 15X8 (2 SETS)$ 250/PR, 15X7 $250/PR, AND 15X6 $225/PR

FACTORY CHRYSLER 15X7 STEEL WHEEL, MID 70'S, $50

FACTORY CHRYSLER 15X6 STEEL WHEEL, LATE 70'S EARLY 80'S, HAS 5 HOLES IN THE CENTER FOR CAP, $50


LOTS OF 4-SPD PARTS- BELLHSGS/FORKS/FLYWHEELS/TRANSMISSIONS/LINKAGES/SHIFTERS/PEDALS/Z-BARS ETC- COMPLETE NUT AND BOLT CONVERSION KITS AVAILABLE RIGHT DOWN TO THE CARPET- STARTING AT $2800 AND UP......

ENGINE PARTS, MECHANICAL PARTS, BODY PARTS, TRIM, INTERIOR SUSPENSION AND MORE!!!!

25+ YRS OF EXPERIENCE AND TECHNICAL KNOW HOW........

ALL OUR REBUILT/REFURBISHED PARTS CARRY A 1 YR " NO SWEAT" WARRANTY ON PARTS AND MATERIALS........

we ship fedex economy freight and ups daily!!! -INVENTORY CONSTANTLY CHANGING CALL WITH NEEDS- ask for Joe MC/VISA/DISCOVER ACCEPTED

Seller Phone Number: 845.742.0571
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
http://www.racingjunk.com/Pistons-Rings/182372602/340-360-Dodge-Mopar-pistons-rings-rods-.html



I have two different sets of pistons rings and a set of rods listed here so read both ads one set are dome pistons the other set are dish pistons and a set of rods for them. I have pics of all the items listed posted here.
Above Added: Sat January 31, 2015, 8:21 pm EST
I also have a brand new set of 360 Wiseco .030 over forged pistons 4.030 bore size D shaped dish pistons with pins and spirol locks they have a .927 Chevy pin size and a compression height of 1.800. Use these with the brand new RPM 6.00 Chevy 4340 I beam rods I am listing here also and with your 360 stock stroke crank these work out to be .010 below the deck 9.590 perfect quench. I do not know the CC of the dish but it looks to be at a least 20 CC dish just looking at them. They weigh 562 grams each and come with the pins that weigh 137 grams each for a total of 699 grams. They take 1/16th top and second rings and a 3/16ths oil ring.
I have a brand new full set of RPM I beam 4340 steel Chevy 6.00 inch rods large journal with ARP 8740 rod bolts bronze pin bushings and oil hole for full floating pin oiling just turn your 360 rod journals down to use these lighter Chevy rods 607 grams each and use cheaper Chevy rod bearings like 14.95 a set at Summit. Rods new are from RPM are 388.00.
I am looking to get 300.00 for the pistons and 300.00 for the rods for a total of 600.00 plus 35.00 shipping anywhere in the lower 48 states that's a lot cheaper than you can buy these rods and pistons for. The pistons alone now would be that much. Take advantage of the lighter Chevy rods and smaller Chevy journal size less drag and cheaper bearings. All new parts. I will take Paypal or postal money order Parts are located in southeastern NC PM me here or call or text me.
Above Added: Sat January 31, 2015, 7:19 pm EST
I have a brand new set of JE forged lightweight domed pistons, pins, spirol locks and JE file fit rings .043 top and second ring 3.0 MM oil rings for a small block Mopar Dodge Plymouth. These are lightweight pistons they weigh 482 grams each pins weigh 128 grams each for a total with pin 610 grams.
These are a 4.06 bore with a .927 pins 1.200 compression height stroker pistons.
These could be used with many different combinations using a 340 or 360 block or a race block using a 4.00 4.125 or 4.250 stroke crank with longer rods like 6.200 or 6.300 rods.
These are a great deal much cheaper than what I paid for them over 900.00 dollars save a lot buying mine if you are building a big stroker race small block Mopar.
Pistons are located in southeastern NC. I will take PayPal if you pay the 3 percent or a Postal money order or cash in person. PM me here or call or text.
500.00 obo shipped in the lower 48

Seller Phone Number: (910) 880-9789
 

greymouser7

Well-Known Member
Joined
Mar 11, 2011
Messages
1,079
Reaction score
90
Location
31547 off of I-95 near I-10
camshaft

http://www.racingjunk.com/Cams/182376010/273-318-340-360-Mopar-Dodge-Chrysler-Comp-Cam.html

$180.00


I have two different brand new Comp Cams hydraulic flat tappet lifter cams for small block Dodge Mopar engines 273 318 340 or 360 and both come with new Comp Cams Pro Magnum hydraulic lifters part number 867-16. I will list each one separately below and post pics of the cam cards with all the specs on each cam:

First cam I have is a brand new Comp Cams Thumpr Flat tappet hydraulic cam for small block engines with the original paperwork part number 20-600-4 plus Comp Cams pro magnum series hydraulic lifters part number 867-16. I will post a pic with all of the specs on this cam. RPM range is 2000-5800 can be used with stock torque converter. Summits price is 133.97 on the cam and 96.97 on the lifters for a total of 230.94. Buy my cam and lifters for 180.00 plus 20.00 for shipping in the lower 48 states. I will take Paypal or postal money order. Parts are located in southeastern NC. PM me here or call or text me.

I have another brand new Comp Cam and lifter set for sale. This one was a special grind done for Tim Sloan Racing engines it is a Hydraulic flat tappet with .240 duration at .050 on both the intake and exhaust and .483 lift with 1.5 rockers or .515 with 1.6 rockers on both the intake and exhaust great hot street cam with gears and converter with a cylinder head that has limited retainer to guide clearance like most stock heads. Or would probably work well in a stroker small block with limited retainer to guide clearance on the cylinder heads. I will post a copy of the spec sheet on the cam im looking to get 175.00 for the cam and a new set of Comp Cams pro magnum lifters part number 867-16 plus 20.00 shipping. I will take Paypal or a postal money order. Parts are located in southeastern NC. PM me here or call or text me.






Seller Phone Number: (910) 880-9789
 
Status
Not open for further replies.
Back
Top