FMJ with Super Stock springs

[Ash_Whole]

how do people run SS springs? there was a MP front spring hanger, discontinued, Mancini sells one, but it is for E body springs with 22 front segments.

the SS springs all use the A body pattern 20inch front segments

 

[Oldiron440]

The way it was done back in the day was to use the main leaf of a stock leaf spring and then use the bundle from the SS springs and then clamp the front leaves together..
However I would fabricate or modify the Ebody hangers for the length needed.
But now days I would use Calvert Racing springs and Caltrack bars but would use the Ebody length and hangers.

 

[XfbodyX]

Long ago I mocked up a set of A body springs (these)... no way any way were these a good option. I might have a pic of these on the car with boxes, the whole afternoon they were on. These would of been im my dumpster long ago if they were not so heavy. Might be good springs for towing a small RV though.

 

[Ash_Whole]

how did it fit with it only having 20 inch segments and the only front hangar i found were on 2 inches longer

 

[XfbodyX]

A spacer with the mopar spacer. I think I still have them, I will see and if so grab a pic.

 

[Ash_Whole]

So a 2 inch spacer between the body and the hanger?