80 Aspen RT
Well-Known Member
Buddy of mine offered me the use of his rotisserie.....SOOOOOOOOOOOOOOOOO much nicer than laying on your back!
Much better than laying on your back!
- Thread starter 80 Aspen RT
- Start date
53ryder
Well-Known Member
Very cool. Wish my garage could handle a piece of equipment like that! And my wallet as well.
Glenn
Glenn
80 Aspen RT
Well-Known Member
My garage isn't very big, its about 23'x 23' with a 8' ceiling. Its real close when I turn the car up, and I will have to put it back horizontal to push it outside.
I was going to build my own rotisserie but when I figured up how much the steel was, I'm glad my friend offered me his. I had to fab up the mounts and the extension in the middle of the bottom rail. I bought 9' of 2 1/2" square and 5' of 2" and it was $83!
I was going to build my own rotisserie but when I figured up how much the steel was, I'm glad my friend offered me his. I had to fab up the mounts and the extension in the middle of the bottom rail. I bought 9' of 2 1/2" square and 5' of 2" and it was $83!
Last edited:
jasperjacko
Well-Known Member
- Joined
- Dec 4, 2011
- Messages
- 1,672
- Reaction score
- 251
Now Thats the way to do it! Look forward to all the progress!
tim berry
Well-Known Member
i love it nice car too !
jasperjacko
Well-Known Member
- Joined
- Dec 4, 2011
- Messages
- 1,672
- Reaction score
- 251
I bet your gonna miss getting all the dirt and junk in your eyes and ears though!
80 Aspen RT
Well-Known Member
Ummmm....yeah I don't think so! LOL... especially when its 100 degrees and it all sticks to ya.
On the other end of that, I actually started scraping last winter and even though the heater was on and nice and toasty up top, I about froze my ass off on the floor!
wvdodgemirada
Well-Known Member
Nice setup! Should cut down on the cussing! :laughing6:
Jack Meoff
Mopar Maniac
I'd love one of those.
80 Aspen RT
Well-Known Member
The plans for this rotisserie are free, and if you can do some welding you can build one. I did change the way it mounts to the car.
http://redwingsteelworks.com
alf44
Well-Known Member
i just read all the plans and i think this guy is awesome to put this up for us guys !!!
80 Aspen RT
Well-Known Member
Seems like a real nice guy, I was having some trouble finding the center of gravity on the rotisserie, so I e-mailed him and he got right back with me and helped me out. Let me tell ya.....this is the ONLY way to work on the bottom side!
