FOR SALE Complete running super six motor and trans.

Status
Not open for further replies.

barbee6043

Well-Known Member
Joined
Feb 26, 2017
Messages
278
Reaction score
60
Location
s e texas
You really need the throttle linkage, choke, I would want it to include exh man, if me,.....kickdown if auto. car, breather as a package IMO
 

barbee6043

Well-Known Member
Joined
Feb 26, 2017
Messages
278
Reaction score
60
Location
s e texas
The 1-bbl and 2-bbl air cleaner lid (I believe) is the same – but carburetor hole on air cleaner base is different size.

If not sure which carburetor it has, take a picture of it (air cleaner removed) and post it – or open choke valve with finger and look inside of it with a flashlight.
Two venturi’s = 2-bbl (circle(s) that will be visible with choke plate open).

I have seen Super 6 air cleaner lids on 1-bbl engines, before.
I guess it is like chrome – it makes the car run faster, maybe?
BudW

The aluminum intakes, sometimes had trouble with pores in casting. I forget if the two piece version or the other. I have had some but never was a problem for me,,,, Like to have another one..
 

4speedjim

Well-Known Member
Joined
Aug 6, 2016
Messages
452
Reaction score
75
Location
Portland NY
IIRC the Al mani's came on feather Dusters, along with Al. bumper(s) and front sheet metal. What else were they used on? Chrysler also tried /6 Al. blocks in the early 60s or 50s. Only a few 100 made it out the factory parking lot before the project was ended. None are known to exist.
 

BudW

Moderator
Staff member
Joined
Mar 4, 2012
Messages
5,121
Reaction score
1,485
Location
Oklahoma City
There are two different versions of aluminum 2-bbl /6 intakes out there.
The ones used for the feather dusters (A-body) – Chrysler took the cast iron molds and used it to make aluminum versions, out of (early to mid ‘70’s). I don’t “think” any of these got used on F-bodies (could be wrong, though).

The newer version aluminum intakes were a two-piece design that is welded together. I hadn’t weighed them – but the 2-piece design is a tad lighter than the older one-piece aluminum intake.
I think the two-piece version came out about ‘81-82 (maybe) and was used until end of production.

If a person is getting a super six intake – it is highly recommended to get all of it (carburetor, throttle cable, kickdown linkage, choke, air cleaner and exhaust manifold) – as an assembly.


Chrysler aluminum intakes do have a pitting problem where exhaust gasses makes contact to it.
I’m not aware of any other problems with /6 aluminum intakes – except for where it attaches to the exhaust manifold.

225 Exh Gasket.JPG

The sorta square flange (above) where the Intake meets the exhaust, sometimes you will have pitting where the gasket touches the intake. If you have that problem, you can take intake to a machine shop who can machine a bit off - just enough to remove the pitting. Then just use two gaskets (2x) when bolting the manifolds back together.

The exhaust heated Long Ram intakes and (high mileage) street Hemi's have the same problem with pitting.
1961_long_ram_manifolds_1947162.jpg

BudW
 

joesnow

Member
Joined
Apr 4, 2016
Messages
22
Reaction score
2
Location
18969
1976 feather duster had the two piece aluminum intake 1 bbl.
Trust me...I know....I owned one
 

joesnow

Member
Joined
Apr 4, 2016
Messages
22
Reaction score
2
Location
18969
Ok.....thats the crime of it....they weigh so much....let me know....no rush....my other option is aluminum offy or clifford...just at some point in figuring on swapping a 440 i have...
Thanks
 

joesnow

Member
Joined
Apr 4, 2016
Messages
22
Reaction score
2
Location
18969
I had one too....slant / auto with ac.
Kinda didn' make sense to be super economic with those options
 

Charrlie_S

Well-Known Member
Joined
Jul 27, 2016
Messages
90
Reaction score
11
Location
silver springs, Florida
Chrysler also tried /6 Al. blocks in the early 60s or 50s. Only a few 100 made it out the factory parking lot before the project was ended. None are known to exist.

Not correct. Thousands (approx 45,000) of 225 cid aluminum slant sixes were installed in mid 1961 to early 1963. There are many still running, today. However due to poor maintainance of the cooling system, by owners, the blocks corroded, and wound up in junk yards. Here is more info.
Here is a little background and history on the Aluminum Block Slant Six engine
 

BudW

Moderator
Staff member
Joined
Mar 4, 2012
Messages
5,121
Reaction score
1,485
Location
Oklahoma City
I thought more than 100 were made. I also thought a lot less than 45,000 were made as well.
That said, I am not a /6 expert and not something I keep on top of, or read much about.
All of them were made before I was born.
BudW
 

4speedjim

Well-Known Member
Joined
Aug 6, 2016
Messages
452
Reaction score
75
Location
Portland NY
More than 100 were made, I think about 300 the article stated. Id never head of one, so I Googled it to see if they ever made them. They were compared to the Chevy Vega:(. Ouch!! I still feel that after 40 years. All of them leaked water, over heated. Porosity and core shift issues. In that time about 100 left the holding lot for dealer lots. Many if not all the cars that escaped received Iron warranty blocks. Someone at Chrysler involved with the Al /6 was who they interviewed. That might have been at moparts allpar and/or Wikipedia. Hotrod says 45000, I doubt it. But really I dont care. However many or few means nothing to me, as long as the info correct.
 

odcics2

Well-Known Member
Joined
May 10, 2015
Messages
169
Reaction score
21
Location
MoTown
IIRC the Al mani's came on feather Dusters, along with Al. bumper(s) and front sheet metal. What else were they used on? Chrysler also tried /6 Al. blocks in the early 60s or 50s. Only a few 100 made it out the factory parking lot before the project was ended. None are known to exist.

They do exist, in the Detroit area.
 
Status
Not open for further replies.
Back
Top