Fender Blinkers

[DCAspen]

I need the measurements to mount a set of fender blinkers on my car,Can anyone help?

 

[BudW]

I don't have any measurements (yet), for need to mount some turn signal lamps to my '77 Volare Fenders.
I have a question for you – that might make a difference – you want measurements for what year and model car?
BudW

 

[DCAspen]

Thanks Bud,They are for my 77',I already have the measurements,76-79 are the same,no fender blinkers in 80',except in Canada.

 

[Oldiron440]

Unless you had the 4 ways on, they are winkers.lol

 

[BudW]

. . . I already have the measurements . . .

Which are?
BudW

 

[DCAspen]

From the front corner of the fender next to the hood,7 3/4" toward the windsheild,1 1/16" across the fender top,that mark will be the center of an 11/16 hole where the light socket comes thru from underneath.A small hole for the screw to mount it to the fender once it is straight.

 

[BudW]

Cool Beans!
Thank you.

 

[DCAspen]

Sorry it took so long,Been focused on working on my car

 

[old yellow 78]

Thanks DCAspen. I have a nice set to put on OY someday, and needed to know the exact measurements. Unfortunately, OY doesn't have the pigtails on the wiring, so I will have to splice them in, but no real problem.

 

[BudW]

. . . OY doesn't have the pigtails on the wiring . . .

Are you sure?
They should be there unless someone cut 'em off.

https://www.forfmjbodiesonly.com/classicmopar/threads/fender-mounted-turn-signals.6567/#post-73130 shows the locations on my ’77 wagon. I have seen these pigtails loose (like mine are) as well as taped on (so it looks like part of wiring harness) – which I suspect yours is taped in place.
BudW

 

[old yellow 78]

Well, that's interesting, and I hope that perhaps they are taped to the harness, but I am fairly certain that they simply aren't there. I'll have to take a look again this weekend. Thanks Bud.

 

[Mr C]

My daugther's 78 Volare had the loose pigtails...

 

[Roadrunner360]

Thanks Bud,They are for my 77',I already have the measurements,76-79 are the same,no fender blinkers in 80',except in Canada.

What are the measurements for mounting the fender mounted turn signals. I may want to add them to my car.
Thanks!

 

[BudW]

From post #6

From the front corner of the fender next to the hood, 7-3/4" toward the windshield, 1-1/16" across the fender top, that mark will be the center of an 11/16 hole where the light socket comes thru from underneath. A small hole for the screw to mount it to the fender once it is straight.

 

[DCAspen]

This thread should be a sticky thread,So other people can get the info.